The diesel-powered Dri-Eaz Dragon Industrial Heater is both powerful and portable. It features a remote thermostat, fume-free operation, and on-board storage and controls. A 55-gallon tank allows the heater to run for up to 3 days without refueling. It easily pulls right behind your vehicle on its own trailer and runs on a 115V/60 Hz electric connection. The Dragon's 100,000 BTU capacity, three-outlet design and recirculation capability delivers maximum heat to the job site for restoration, event shelters, and work areas – wherever clean, dry temporary heat is needed.
Versatile and Functional
The Dri-Eaz Dragon X2 Industrial Heater allows you to bring all the heat you need right to the job site. It can be used as a heater or a dryer, and the Dragon runs in low temperatures utilizing a mixture of diesel and kerosene. The thermostat is easily set and will maintain steady temperatures without any work from you.
The Dragon utilizes an indirect-fired design, which keeps combustion air and exhaust completely separate from the air it heats. This allows the Dragon to deliver heated air without adding fumes, smoke or moisture.
While the Dri-Eaz Dragon Mobile Furnace needs to be operated outside for safety, it comes with several lengths of ducting so you can funnel heated air into your space. When the air around the Dragon becomes too hot for safe operation, it will automatically shut off. A rain shield is included in the Dragon's design so that your fuel stays clean and the heater runs efficiently. Because the unit comes attached to its own trailer, transport is safe and easy.
The Dragon X2 is equipped with a remote thermostat that can be used to control the temperature in the target area. The remote thermostat allows you to precisely control the temperature of the affected area. Maintaining a steady temperature can reduce fuel consumption while maintaining the ideal drying temperature inside the structure. Of course, thermostatic control is critical for providing safe, comfortable temporary heat in occupied areas. In many cases, using the thermostat will also significantly increase your run time between refuelings. To use the Dragon in thermostat mode, set the desired temperature on the thermostat control for a maximum of 102°F (39°C) and place the control in the target area.
For use in water damage restoration and new construction drying, the Dragon can increase drying efficiency. The added heat from the Dragon will increase the rate of evaporation by decreasing the relative humidity of the affected area. Raising the temperature of a drying area with the Dragon from 60° to 70°F can increase the evaporative potential of your existing drying system up to 45 percent.
Cold Weather Operation: In temperatures below 23 degrees F, diesel can be mixed with kerosene to avoid clogged fuel lines
Easy Cleaning: The unit housing can be cleaned with a standard degreaser
Flexible Ducting: Comes with 3 lengths of 25-foot ducting
Remote operation: On-board controls allow you to set the temperature and leave
On-Board Storage: Unit offers 2 weatherproof, locking cabinets for storage
Strong Finish: Heater is finished with a strong powdercoat that holds up in many climates
If you need a safe, powerful heater or dryer for large industrial spaces, this heater is easy to use and move.
What Customers Love
Versatile Uses: It provides maximum heat to the job site for water damage restoration, new construction drying, unheated jobsites, event shelters, green houses, warehouses, and other work areas – wherever clean, dry temporary heat is needed.
Long-Lasting: This model was built to work in any temperature or weather conditions thanks to low-temperature operation and its strong design.
Things to Consider
Industrial Uses Only: This model is designed for construction and industrial areas and should be used with caution since it offers such a large amount of heat.