Dri-Eaz Flood King DX Flood Pumper

The Flood King DX is an innovative flood pumper that is both useful and easy to maintain. For starters, this flood pumper is portable, making it a great tool to have for use in multi-level buildings. Water is collected in the 9.5 gallon pump tank, or can be extracted through a 50 foot drain hose. The two internal vacuum motors combine to remove up to 10.5 gallons of water per minute. The unit can store either 1.5” or 2” extraction wands (not included) for easy access.

When using a pump to remove flood water, clogging can often be a nuisance. The Flood King uses a three-stage filtration system (pre-filters, inline filters, and tank filters) to reduce the number of these clogs. The filters are long-lasting and easy to remove for cleaning. The durable water filters combined with a MICROBAN® antimicrobial protection allow you to keep this unit running smoothly with just light maintenance.

The compact size, quiet operation and thoughtful design make this flood pumper a useful tool for any restoration professional.

** Add to Cart for quantity pricing **

• Removal capacity – 10.5 gallons per minute (GPM)
• Tank capacity – 9.5 gallon
• Float system – automatically shuts-off power when recovery tank is full
• Three-stage filter system – pre-filters, inline filters, tank filters
• Pre-filter – 800-micron polyester mesh
• Inline and tank filters – stainless steel 50 mesh
• Discharge pumps – 2 diaphragm bilge pumps
• MICROBAN® antimicrobial protection
• Water lift/CFM - 100 inches/170 CFM
• Intake hose – 2” x 25’
• Discharge hose – ¾” x 50’
• Weight – 88 lbs.
• Power – 120 V, 13.0 amps
• Cord – 25’, three wire
• Dimensions (H x W x D) – 40” x 24” x 23”
• Warranty – 7 year limited warranty