Ebac CD425 Industrial Dehumidifier

Overview
Specifications
Manufacturer Info
Customer Reviews
FAQs
Accessories

Product Overview

This unit was developed to serve the demands of industry for environmental control of very large areas as well as areas with severe conditions. Warehouses factories, offices and other large-scale facilities with ambient temperatures ranging from 33 F to over 100 F can be cured of humidity and condensation problems efficiently and automatically without over burdening costly HVAC systems. The CD425 can be utilized singly or in multiple units to provide protection on any scale. Ducted applications are possible where design requirements specify.

Features:

Welded steel chassis with baked epoxy and vinyl coatings for abrasion resistance.
An adjustable humidistat, to control the level of dryness desired.
System lamps to tell the operating status of the unit at a glance.
Ebac's unique "Hot Gas" defrosting systems.
Rugged design for harsh industrial environments.
Condensate Pump (CD425-P)

Model CD425

Compressor: Reciprocating
Horsepower: 4
Refrigerant: R-22
CFM: 1750
Operating Range: 33F - 105F
Volts: 220 (440 option available), 3PH
Noise Level: Approximately 69 DB
Amps: 16
Capacity: 285 ppd @ AHAM (80F, 60%rH), 50 gallons at saturation
Height: 47", Width: 43", Depth: 19"
Weight: 353 lbs.

Options: Also available in 440 Volt, 3-Phase - Please call to order this configuration

Product Specifications

Recommended For	Industrial and commercial applications
Manufacturer-Stated Capacity	285 pints
Practical Room Size	10000 Sq. Ft.
Manufacturer-Suggested Room Size	10000 Sq. Ft.
Capacity at AHAM	285 pints
Capacity at Saturation	400 pints
Height	47 in.
Width	43 in.
Weight	353 lbs.
Lowest Operating Temperature	33 º F
Internal Condensate Pump	Yes (Model #CD425-P)
Continuous Drain Capable	Yes
Water Container	No
Full Bucket Auto-Shutoff	No
Automatic Defrost	Yes
Cubic Feet Per Minute	1750 Cu. Ft. per Min.
Auto-Restart on Power Failure	Yes
Controls	Manual
Washable Air Filter	No
Replaceable Air Filter	No
Refrigerant Type	R-22
Fan Operation	Runs only when dehumidifying
Number of Fan Speeds	1
Maximum Noise Level	69 dB
Casters	No
Amperage	16 Amps
Watts	2984 W
Voltage	220/460 V
Energy Star-Rated	No

Manufacturer Information

Manufacturer Warranty
1-Year Unconditional Warranty; 3-Year Warranty on Compressor, Condenser, and Evaporator

Manufacturer Literature
Owner's Manual (Adobe PDF)
User guide for the Ebac CD425 220V, 3-Phase Dehumidifier

Owner's Manual (Adobe PDF)
User guide for the Ebac CD425 440V, 3-Phase Dehumidifier

Product Brochure (Adobe PDF)
Product brochure for the Ebac CD425

Wiring Diagram (Adobe PDF)
Wiring diagram for the 220V, 3-Phase Ebac CD425

Wiring Diagram (Adobe PDF)
Wiring diagram for the 440V, 3-Phase Ebac CD425

Wiring Schematic (Adobe PDF)
Wiring schematic for the 220V, 3-Phase Ebac CD425

Wiring Schematic (Adobe PDF)
Wiring schematic for the 440V, 3-Phase Ebac CD425

Customer Reviews

Frequently Asked Questions

What is the ideal humidity level this unit should maintain?

We recommend you maintain a humidity level of between 45 and 50 percent. Too much humidity creates an ideal environment for mold, dust mites, bacteria, and pests to thrive. Too little humidity can be just as damaging by causing health issues such as an increase in colds and the flu and irritated skin and respiratory passages. Low humidity can also contribute to cracked ceilings, separated wood floors, damage to furniture, and more. Learn more about this in our article Dehumidifiers: Frequently Asked Questions.

Should a dehumidifier be setup as close to floor level as possible or will they work the same if raised a few feet up off the ground?

Dehumidifiers can be either situated on a floor level or raised without affecting operation. When raised a few feet, the dehumidifier will benefit from improved gravity drainage.

Where are Ebac dehumidifiers manufactured?

All Ebac dehumidifiers are manufactured in the UK.

Is this unit recomended for the restoration industry?

This is recommended for industrial and commercial applications, but many other Ebac models are designed for the restoration industry. Check them out here.

What is your return policy?

We offer a 30-Day Money-Back Guarantee on all of our products. If you are not satisfied with your purchase for any reason, simply return the product to us within 30 days and we will process your refund. For policy details and exclusions, please read our full Return Policy

What is your shipping policy?

Standard shipping (5-10 business days) is free to the lower 48 states.

Expedited shipping is available for select products. Shipping to Hawaii, Alaska, and Canada may incur an additional fee, depending on the items ordered. With the exception of Canada, we do not currently ship to international locations. Items typically ship 1-2 days after you place your order. For more information, visit our Shipping and Delivery page.

What types of payment methods do you accept?

We accept Visa, MasterCard, American Express, Discover Card, and Diners Club credit cards. Additionally, you can checkout using PayPal and Google Checkout.

As a Sylvane shopper, you can purchase with confidence knowing that your information will always remain confidential and secure at all times. Our website is tested daily for security flaws by a well-known third-party security firm. It also meets the security recommendations of the Department of Homeland Security's National Infrastructure Protection Center (NIPC) and passes the FBI's Twenty Most Critical Internet Security Vulnerabilities Test.

After I place my order, when will my credit card be charged?

Your credit card will be charged when your order is shipped.

Ask a question about this product

Don't see the answer to your question? Just ask! Submit a question about this product and a Sylvane product expert will post the answer in this section. Please provide your email if you would like to be notified when your question is answered.

We strive to answer all frequently asked questions in a timely manner. However, some questions are better suited to be answered by a Sylvane customer service representative. If you have questions regarding specific product orders, tracking, returns, or need technical support for your product, please contact Sylvane customer service by calling 1-800-934-9194 or filling out an order inquiry.

If you would like to speak with a Sylvane product expert to discuss your specific application and receive a product recommendation, please call 1-800-934-9194 or email our sales department.