IQAir Replacement Filters & Accessories

Replacement prefilter for HealthPro series purifiers (filter F1).

Replacement HEPA filter for IQAir HealthPro series air purifiers.

Filters very large particles so that they do not clog the pre-filter prematurely. Although not normally needed - this kit may be useful when dealing with construction dust, high amounts of pet dander / hair, any other environment with excessive particles. The PF40 kit consists of an upper grille which screws into the filtration device's base. A synthetic coarse dust filter pad is held in place by a lower grille that is secured by four clips. The 1/2 inch deep non-woven design of the PF40 filter pad ensures superior coarse dust holding capacity. The filter pad may be washed several times before it needs to be replaced.

Set of 4 replacement filters for the Perfect 16 ID-2530 unit. Typical filter life is 36 months. (Filter Size 4)

Replacement Pre-filter for GCX Series units - MultiGas, VOC, AM, Chemisorber.

Replacement pre-filter element for the IQAir Cleanroom H13 HEPA air purifier.

Replacement HEPA filter for the IQAir Cleanroom H13 HEPA air purifier.

Replacement gas cartridge set for VOC GCX.

Enables any IQAir filtration unit to direct filtered air through a wall or window vent. Used to create a clean area, deliver filtered air into cleanrooms or to the outside, or to create under-pressure or over-pressure areas.