Price: $1799.00, plus FREE Shipping
![]() | White Glove Delivery Available Details |

The Phoenix Guardian HEPA System was the first portable air-scrubbing device designed exclusively for the restoration industry. The Guardian HEPA Air Scrubber can perform several critical air quality remediation functions simultaneously. The system captures virtually all removable airborne particles while its optional 4-stage odor absorption filter uses activated carbon and potassium permanganate to remove airborne odors and chemicals.
The true 1,400-CFM capacity of the Phoenix Guardian HEPA System will clean one air change of a 12- x 14-foot room in less than a minute. Therefore, a single Guardian can be expected to cover up to 21,000 cubic feet.

The unit's built-in, inclined manometer provides precise measurement of airflow through the HEPA filter in order to determine when HEPA filter replacement is required.
The Guardian's high airflow and multiple ducting options allow for a combination of negative or positive airflow control within an area and for containment air-scrubbing at the same time. This provides a unique ability to continually filter the indoor air while depressurizing a damage site to prevent the spread of contamination.

The Guardian's intake will accept either an 18-inch flex-duct or a 12-inch flex-duct with included adapter, to pressurize areas for protection from contamination or to draw contaminated air from areas that are difficult to access or that are too small to accommodate an air-scrubbing device.
Every Phoenix Guardian HEPA Air Scrubber comes with one 14-inch lay-flat duct ring for 100% negative air operation, and two 10-inch lay-flat duct rings for a combination of negative air, air-scrubbing, or positive airflow.
| Recommended For | Restoration Industry |
| Height | 40 in. |
| Width | 27 in. |
| Depth | 28 in. |
| Weight | 121 lbs. |
| HEPA Filter | Yes |
| Electrostatic Filter | No |
| Particle Filter (Non-HEPA) | Yes |
| Carbon Filter | Yes |
| Number of Fan Speeds | 2 |
| Amount of Air Moved (Max CFM) | 1400 cu. ft. per min. |
| Washable Filter | No |
| Number of Filters to Change | 4 |
| Average Frequency of Filter Changes | Depends on usage |
| Remote Control | No |
| Filter Change Indicator | No |
| Amperage | 12 Amps |
| Voltage | 120 V |
| Auto-Restart on Power Failure | Yes |
| Digital Controls | No |
| Casters | Yes |
| Color | Stainless Steel |
| Housing Type | Stainless Steel |
| Energy Star-Rated | No |
| Programmable Timer | No |
| Ultraviolet Light | No |
| Ozone Emission | None |
Reviewed by 1 customer
Displaying review 1
Comments about Phoenix Guardian HEPA System:
The Phoenix significantly reduces particle count in a relatively short time period. The motor runs smooth. A lower speed option would be a positive addition. I would purchase this product again.
Displaying review 1
Don't see the answer to your question? Just ask! Submit a question about this product and a Sylvane product expert will post the answer in this section. Please provide your email if you would like to be notified when your question is answered.
We strive to answer all frequently asked questions in a timely manner. However, some questions are better suited to be answered by a Sylvane customer service representative. If you have questions regarding specific product orders, tracking, returns, or need technical support for your product, please contact Sylvane customer service by calling 1-800-934-9194 or filling out an order inquiry.
If you would like to speak with a Sylvane product expert to discuss your specific application and receive a product recommendation, please call 1-800-934-9194 or email our sales department.
Copyright © 2013, Sylvane Inc. | 245 Hembree Park Drive, Suite 90, Roswell, GA 30076 | 1-800-934-9194