HLG 700 Rspec FR Commercial Indoor LED Grow Light
HLG 700 Rspec FR Commercial Indoor LED Grow Light is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
Info & Guides
Info & Guides
HLG 700 Rspec FR Commercial Indoor LED Grow Light is backordered and will ship as soon as it is back in stock.
Description
Description
Flowering plants slow down when light fades at the edges and lower levels of the canopy. The HLG 700 Rspec FR Commercial Indoor LED Grow Light uses integrated reflectors to improve PPFD (the light intensity actually reaching your plants) at all levels of the canopy, not just the top.
Because the output dims, the same fixture works in a grow tent, over a flood table, or above rolling benches in a commercial room. The included manual knob lets you dial intensity up or down as your plants move through each stage.
Key Features and Benefits of the HLG 700 Rspec FR Commercial Indoor LED Grow Light
- Far-Red Spectrum: 730-nanometer far-red and 660-nanometer deep-red diodes join full-spectrum white light, giving your plants the wavelengths that drive heavier flowering and higher yields.
- Total Light Output: A total output of 1585 PPF (micromoles of usable light per second) gives you enough intensity to flower a full 5 x 5 feet of canopy.
- High Efficacy: A 2.5 micromoles per joule efficacy rating means more of every watt you pay for becomes light your plants can actually use.
- Quantum Board Design: The fixture runs 4 QB272 Quantum boards, spreading diodes wide for even light distribution and deeper canopy penetration.
- Manual Dimming Knob: The included RJ12 0-10V manual knob adjusts power from 0 to 633 watts, so you can match intensity to plant stage or room conditions.
- Dual-Voltage Cords: Power cords for both 120-volt and 240-volt circuits are included, so you can plug into whichever service your grow space already has.
- Passive Cooling: The integrated passive-cooled design helps keep operating temperature down, and the fixture averages 77 degrees F in use.
- Safety Certifications: UL 8800 and cETLus listings confirm the fixture meets North American safety standards for horticultural lighting equipment.
- Mounting Height: A recommended mounting height of 24 inches gives you a clear starting point for hanging the light above your canopy.
Check Hanger Load and Coverage Before You Mount It
The fixture measures 37.5 x 27.125 x 3.75-Inches (L x W x H) and weighs 20.25 pounds, so confirm that your hangers or tent bars can carry that load before mounting it. Both the flowering and vegetative footprints are listed at 5 x 5 feet, so the same coverage applies to each growth stage. The voltage rating spans 110-120 volts and 220-240 volts, and the included power cords let you connect to either service.
Sylvane's Expert Take
If your flowering canopy covers 5 x 5 feet and you want bigger yields from a fixture that stays cool in operation, this light belongs on your shortlist. It fits a grow tent, a flood table, or a rolling bench. The far-red and deep-red diodes matter most because they target the flowering stage directly. Worth knowing: the included cords for both voltages let you plug in on a 120-volt or 240-volt circuit, so you can move it between setups.
Specifications
Specifications
-
Total Output (PPF)1585
-
CertificationscETLus
-
Dimming Control TypeRJ12 0-10V (Requires 3rd Party Controller) w/ Manual Knob
-
Flowering Footprint (ft.)5x5
-
Lighting TypeLED
-
System PPF Efficacy (μmol/joule)2.5
-
Veg Footprint (ft.)5x5
-
Plug Face Type5-15P
-
Power Cord Length (ft.)4
-
Voltage (V)110-120, 220-240
-
Watts (W)633
-
Depth (in.)37.5
-
Height (in.)3.75
-
Weight (lbs.)20.25
-
Width (in.)27.125
-
Additional FeaturesFull Spectrum, Dimmable, Applicable for Indoor Growing
-
Manufacturer's Warranty3-Year Warranty
