Husqvarna W250P Wet and Dry Slurry Vacuum
Husqvarna W250P Wet and Dry Slurry Vacuum is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
Info & Guides
Info & Guides
Husqvarna W250P Wet and Dry Slurry Vacuum
Husqvarna W250P Wet and Dry Slurry Vacuum is backordered and will ship as soon as it is back in stock.
Description
Description
Slurry left on a slab after wet cutting slows the next trade and leaves a mess you have to deal with sooner or later. The Husqvarna W250P Wet and Dry Slurry Vacuum handles that cleanup while the job is still running, pulling slurry off the floor and pumping it out at the same time. It runs on single-phase power, so it plugs into the outlets you already have on most jobsites.
Key Features and Benefits of the Husqvarna W250P Wet and Dry Slurry Vacuum
- Simultaneous Pumping: A built-in evacuation pump moves slurry up to 492 feet horizontally or 19.6 feet vertically, so you can send waste well away from the work area while vacuuming.
- Strong Airflow: The 1,550-watt motor produces 95 CFM of airflow, giving you the suction to pull heavy slurry off bare concrete floors.
- Overfill Protection: A patented filter and float system keeps airflow at its maximum and then triggers a wet shutoff when the container fills, so you avoid overflow.
- Collection Capacity: A disposable bag holds 7.66 gallons of wet and dry slurry, keeping debris contained so disposal stays cleaner at the end of the shift.
- Stainless Container: The stainless-steel container and cast aluminum swivel hose lock hold a tight air seal with steel clamps, giving you a long service life.
- Crush-Proof Hose: The crush-proof hose resists collapse on busy floors and gives you 10 feet of reach from the vacuum without losing suction.
- Jobsite Mobility: The galvanized steel dolly rides on 4 non-marking, puncture-free wheels, and the front wheels lock to hold the vacuum in place.
- Standard Power: It operates on 110-120 volts at 13 amps, so you can run it from standard single-phase jobsite power.
- Wide Coverage: The 17.7-inch cleaning path and 4 included attachments let you clear open stretches of bare floor in fewer passes.
- Noise Level: A maximum noise level of 85 dB means you should plan for hearing protection during extended cleanup runs.
Moving the W250P Between Cuts
If your crew moves the vacuum from cut to cut across a slab or between floors, plan each relocation before you start. At 55 pounds, rolling it across a smooth floor takes far less effort than lifting it over a threshold or up stairs. Its dimensions of 20.8 x 20.5 x 35.8-Inches (L x W x H) show how much floor and clearance it needs, so measure the spot where you plan to park it before the first cut.
Sylvane's Expert Take
If you run a concrete cutting or surface prep crew on sites with only standard wall outlets, the W250P fits interior slab work and drilling jobs where larger systems are impractical. The float shutoff stops pickup once the container is full, so check fill level between cuts during long wet-sawing sessions to avoid a mid-cut pause. The evacuation pump matters most, because it lets you route slurry to one containment point instead of hauling it across the slab. On prep jobs where cleanup time eats into billable hours, the W250P earns its spot on the trailer.
Specifications
Specifications
-
TypeCanister
-
Attachments4
-
Cleaning Path (in.)17.7
-
Cleaning Reach (ft.)10
-
Collection Capacity (qt.)30.64
-
Collection TypeBagless
-
ColorOrange, Silver
-
Debris TypeWet/Dry
-
Floor Surface TypeBare Floors
-
Maximum Cubic Feet per Minute (CFM) (CFM)95.0
-
Maximum Noise Level (dB)85
-
Recommended ForConstruction & Surface Prep
-
Vacuum Capacity (Gallons)7.66
-
Water Lift (ft)8.33
-
Maximum Amperage (Amps)13.0
-
Power SupplyPlug-In
-
Voltage (V)110-120
-
Watts (W)1550
-
Depth (in.)20.8
-
Height (in.)35.8
-
Hose Length (ft.)10
-
Weight (lbs.)55
-
Width (in.)20.5
-
Manufacturer's Warranty2-Year Limited Warranty
