FREE Shipping Over $45*

0% APR 1yr financing with Affirm*
1 3

TPI CE30DS 30-In. 2-Speed 1/4 HP Direct Drive Shutter Mounted Exhaust Fan

SKU: tp13504  |  Model: CE 30-DS
$92800

Have a question or need a quote? Ask Our Experts

Live Chat | 1 (800) 934-9194 | Email

Manufacturer's Warranty

1-Year Limited Warranty

What's In The Box?
  • TPI CE30DS 30-In. 2-Speed 1/4 HP Direct Drive Shutter Mounted Exhaust Fan
  • Owner's Manual
  • No-Cord Junction Box

Description

Heat, fumes, and stale air build up fast in a busy facility or production area, and a wall fan that's hard to install tends to get put off. The TPI CE30DS 30-In. 2-Speed 1/4 HP Direct Drive Shutter Mounted Exhaust Fan removes that obstacle. You mount it from the interior with no external framing or separate shutters to build, then wire it in and start pulling air out.

Key Features and Benefits of the TPI CE30DS 30-In. 2-Speed 1/4 HP Direct Drive Shutter Mounted Exhaust Fan

  • 2-Speed Airflow: Low moves 3,080 CFM and high moves 3,850 CFM, so you can run gentle air turnover on mild days and full exhaust when heat peaks.
  • Maximum Rated Airflow: The CE30DS carries a 3,950 CFM maximum airflow rating, giving you commercial-grade air exchange for large open work areas.
  • Direct Drive Motor: A 1/4-horsepower direct drive motor spins the blade at up to 1,140 RPM, sending power straight to the fan for consistent output.
  • Enclosed Motor: The split capacitor motor is fully enclosed with a permanently lubricated sleeve bearing, so you never oil it and the motor resists overheating.
  • Guarded Aluminum Blades: The 30-inch aluminum fan blades sit behind steel spiral wire guards, which shield the blades from contact while the fan runs.
  • Simple Speed Control: You switch between low and high with the pull chain or toggle switch control, so changing speeds takes no tools.
  • Hardwired Power: The fan wires directly to a 110 to 120-volt, single-phase circuit through the included no-cord junction box, and its 2.7-amp maximum draw keeps electrical demands modest.
  • Steel Construction: A gray steel housing, made in the USA with domestic and foreign components, holds up in commercial and industrial settings.

Plan Your Wall Opening for the CE30DS

Frame a 30.5-inch square opening before the fan goes up. The housing measures 33.125 x 7.18 x 33.125-Inches (L x W x H), so its frame extends past the cutout on every side and gives you a solid surface to fasten against. The shallow depth keeps the fan close to the wall, leaving nearby aisles and shelving clear. Because the fan weighs 54 pounds, it's easier to set with a helper, and you should confirm your wall framing can carry that load before you cut.

Sylvane's Expert Take

If you manage a commercial or industrial space where heat and fumes linger, the CE30DS gives you high-volume exhaust through a single wall opening. It suits walls you can reach from inside but would rather not frame on the exterior.

This fan must be hardwired, so plan for an electrician if no circuit runs near the opening. The 2 speeds and the enclosed, self-lubricated motor matter most, giving you strong airflow with almost no upkeep. Put it on the wall that needs to breathe the most.

Specifications

    Key Specifications

    • Number of Speeds
      2
    • Type
      Shutter Exhaust Fan

    General

    • Application
      Commercial/Industrial
    • Color
      Gray
    • Controls
      Toggle Switch
    • Housing Material
      Steel
    • Maximum Cubic Feet per Minute (CFM) (CFM)
      3950.0
    • Maximum RPM
      1140
    • California Residents
      ⚠ WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.p65warnings.ca.gov.

    Power

    • Maximum Amperage (Amps)
      2.7
    • Power Supply
      Plug-In
    • Voltage (V)
      110-120

    Dimensions

    • Ceiling or Wall Cutout Length (in.)
      30.5
    • Ceiling or Wall Cutout Width (in.)
      30.5
    • Depth (in.)
      7.18
    • Height (in.)
      33.125
    • Shutter Fan Size (in.)
      30
    • Weight (lbs.)
      54
    • Width (in.)
      33.125

    Warranty

    • Manufacturer's Warranty
      1-Year Limited Warranty

Recommended Accessories

Customer Reviews