Swampness Monster 17,500 CFM Evaporative Cooler
Swampness Monster 17,500 CFM Evaporative Cooler - 230V is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
Info & Guides
Info & Guides
Swampness Monster 17,500 CFM Evaporative Cooler - 230V is backordered and will ship as soon as it is back in stock.
Description
Description
In large, open work areas, fans alone mostly push hot air around. The Swampness Monster 17,500 CFM Evaporative Cooler pulls air through water-soaked pads to cool repair bays and outdoor event spaces, and its manual controls mean anyone on your crew can run it. You can pick between 120V and 230V configurations to match the power at your site.
Because evaporative cooling works by adding moisture to dry air, you get the biggest effect in arid climates, where this swamp cooler can bring air temperature down by 10 to 20 degrees. It performs best in open, ventilated spaces, indoors or out, where fresh air keeps moving through the pads.
Key Features and Benefits of the Swampness Monster 17,500 CFM Evaporative Cooler
- High-Volume Airflow: A belt-driven, single-speed stainless steel fan blade moves 17,500 CFM, so you can cool open floor areas up to 4,000 square feet.
- Water Consumption: Evaporates up to 17 gallons of water per hour, which helps you plan refills or a hose connection for long shifts.
- Reservoir Capacity: The 13.5-gallon tank and built-in hose hookup let you run from the reservoir or connect a water line for continuous fill.
- Low-Water Shut-Off: The pump turns off automatically when water runs low, and a water level indicator shows you at a glance when to refill.
- Locking Casters: You get 4 heavy-duty casters, 2 fixed and 2 swivel with locks, so you can roll the cooler into position and keep it there.
- Removable Cooling Pads: Antibacterial-coated pads sit under hinged top covers, so routine cleaning takes little effort.
- cETLus, CE Certified: The cooler carries cETLus and CE certifications, so you can confirm it meets recognized electrical safety standards before installing it.
- Corrosion-Resistant Build: A black powder-coated finish and stainless steel fan blade resist corrosion, so the cooler holds up in damp, harsh outdoor work areas.
- Freestanding Footprint: Measures 73 x 35 x 74-Inches (L x W x H) and weighs 625 pounds, so measure doorways and floor space before you move it in.
Choose the Right Voltage
You can choose a 120V or 230V model, depending on the electrical service where the cooler will run.
- 120-Volt Model: The SM-48-B-120 runs on 110 to 120 volts and draws up to 8.5 amps and 978 watts, so you can plug it into a standard outlet.
- 230-Volt Model: The SM-48-B-230 runs on 208 to 230 volts and draws up to 9.5 amps and 2,185 watts, suiting facilities wired for higher-voltage equipment.
Sylvane's Expert Take
If you're cooling a warehouse bay or open-air garage in a dry climate, this cooler gives you real relief without installing air conditioning. Keep bay doors or windows open, since evaporative cooling falls off quickly in a sealed, humid room.
Both voltage models deliver the same airflow, so choose based on the circuit you already have rather than cooling output. The hose hookup and low-water shut-off matter most for all-day runs, and they make this a cooler you can switch on at dawn and leave running.
Specifications
Specifications
-
Mounting TypeFreestanding
-
ApplicationIndustrial
-
CertificationscETLus, CE
-
ColorBlack
-
ControlsManual
-
Hose HookupYes
-
Maximum Cubic Feet per Minute (CFM) (CFM)17500.0
-
Recommended Coverage Area (sq. ft.)4000
-
Recommended ForIndoor, Outdoor, Warehouse, Repair Shop, Garage/Workshop
-
Water Reservoir Capacity (Gallons)13.5
-
Maximum Amperage (Amps)9.58.5
-
Maximum Wattage (W)2185978
-
Voltage (V)208-230110-120
-
Depth (in.)35.0
-
Height (in.)74.0
-
Weight (lbs.)625
-
Width (in.)73.0
-
Additional FeaturesCasters, Water Level Indicator, Applicable for Indoor Growing
-
Manufacturer's Warranty1-Year Limited Warranty

