TPI CE12DS 12-In. 3-Speed 1/12 HP Direct Drive Shutter Mounted Exhaust Fan
TPI CE12DS 12-In. 3-Speed 1/12 HP Direct Drive Shutter Mounted Exhaust Fan is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
TPI CE12DS 12-In. 3-Speed 1/12 HP Direct Drive Shutter Mounted Exhaust Fan is backordered and will ship as soon as it is back in stock.
Description
Description
The TPI CE12DS lets you do the whole job indoors. Because the shutter is part of the fan assembly, you cut the opening and set the fan in place, then wire it up. Listed applications range from residential basements and crawl spaces to commercial or industrial buildings. In any of those spaces, leave the fan on Low for steady air exchange and switch to High when heat or fumes need to clear fast.
Key Features and Benefits of the TPI CE12DS 12-In. 3-Speed 1/12 HP Direct Drive Shutter Mounted Exhaust Fan
- Selectable Airflow Speeds: Select from 3 speeds, running from 560 CFM on Low to 825 CFM on High, with Medium at 710 CFM for matching airflow to heat or fumes.
- Interior Wall Installation: The 12-inch fan mounts from inside the wall with no external framing or separate shutters, so you never have to work from outside the building.
- Pull Chain Control: A pull chain and toggle switch control let you move between the 3 speeds right at the fan, so changing airflow takes seconds.
- Direct-Drive Motor: The 1/12-horsepower motor reaches up to 1,560 RPM and drives the blades directly, so there are no belts for you to adjust or replace.
- Enclosed Motor: The fully enclosed, permanently lubricated split-capacitor motor never needs oiling, which keeps your upkeep low in dusty garages and attics.
- Guarded Aluminum Blades: Steel spiral wire guards cover the 12-inch aluminum blades, which lowers the risk of hands or debris reaching the moving parts.
- 120-Volt Hardwired Connection: Single-phase power at 1.1 amps connects through the included no-cord junction box, so you can wire it straight to your power source.
Planning the Wall Opening for Your CE12DS
Before you cut, mark a 12.5 x 12.5-Inches (L x W) opening, which is the cutout this fan requires. The fan measures 7.18 x 15.125 x 15.125-Inches (L x W x H) overall, so the fan body is wider than the cutout. The 7.18-inch depth tells you how far the fan sticks out from the wall, which matters in a tight attic or crawl space with little clearance. At 16 pounds, the fan is manageable to hold while you fasten it.
Sylvane's Expert Take
If you're venting a garage or attic that holds heat or fumes, this fan fits well. Because it installs from inside, you skip outside framing. Plan your wiring ahead of time, since the fan connects directly through its junction box.
The features that matter most are the 3-speed range and the enclosed, permanently lubricated motor. You get airflow control without regular maintenance, and that makes this 12-inch fan a solid pick for both home and commercial ventilation.
Specifications
Specifications
-
Number of Speeds3
-
TypeShutter Exhaust Fan
-
ApplicationResidential, Garage/Workshop, Basement, Crawlspace, Commercial/Industrial, Attic
-
ColorGray
-
ControlsToggle Switch
-
Housing MaterialSteel
-
Maximum Cubic Feet per Minute (CFM) (CFM)825.0
-
Maximum RPM1560
-
California Residents⚠ WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.p65warnings.ca.gov.
-
Maximum Amperage (Amps)1.1
-
Power SupplyPlug-In
-
Voltage (V)110-120
-
Ceiling or Wall Cutout Length (in.)12.5
-
Ceiling or Wall Cutout Width (in.)12.5
-
Depth (in.)7.18
-
Height (in.)15.125
-
Shutter Fan Size (in.)12
-
Weight (lbs.)16
-
Width (in.)15.125
-
Manufacturer's Warranty1-Year Limited Warranty

