Gavita CT1930e LED Grow Light - CT1930e / 120V is backordered and will ship as soon as it is back in stock.
Description
Description
Switching a grow facility from HPS to LED can stall production while layouts get redesigned. The Gavita CT1930e LED Grow Light avoids that problem as a true 1:1 replacement for the Gavita Pro 1000e HPS. It matches that fixture's footprint and compatible wiring, so you can swap lights in place, even across a facility running as many as 10,000 of them.
Once it's hung, the bigger change is the light your plants get. Premium drivers power each diode for a uniform full-spectrum output. Wide optics reproduce a light pattern nearly identical to HPS, so intensity stays even from the center of your canopy to its outer edges.
Key Features and Benefits of the Gavita CT1930e LED Grow Light
- 1:1 HPS Replacement: An identical footprint to the Gavita Pro 1000e HPS lets you swap fixtures without changing your hanging plan or room layout.
- High Output: The CT1930e puts out 1930 micromoles per second at 780 watts, putting more plant-usable light on your canopy from each fixture.
- Efficient Conversion: An efficacy of 2.5 micromoles per joule gives you up to 20 percent energy savings compared to a single-ended HPS fixture.
- Full Spectrum: Broad-spectrum diodes cover 400 to 700 nanometers with boosted red and blue plus balanced green, supporting your plants at every growth stage.
- Wide Dimming Range: You can dim from 10 to 100 percent to simulate sunrise, sunset, and changing day lengths for each stage of growth.
- Passive Cooling: A cold-forged aluminum heat sink cools the fixture passively, so there is no fan to service or replace.
- IP66 Rated: An IP66 rating for wet environments and UL880 compliance help the fixture hold up in humid, frequently watered grow rooms.
- Certified Safety: UL and CSA listings, plus ANSI certification, show the fixture meets recognized electrical safety standards for your installation.
- Slim Toplight Profile: At 29 x 11.8 x 3.9-Inches (L x W x H) and 33.07 pounds, the slim fixture saves vertical space above your canopy.
Choose Your Voltage
You can order the CT1930e in 120V, 208-240V, or 277-400V versions, so you can match the light to the circuits already in your facility.
- 120V: This version runs on 110 to 120-volt circuits with a NEMA 5-15P plug and works in ambient temperatures up to 104 degrees F.
- 208-240V: This version connects to 208 to 240-volt circuits with a NEMA 6-15P plug and works in ambient temperatures up to 104 degrees F.
- 277-400V: This version uses an open-end power cord for 277 to 400-volt commercial wiring and works from 32 to 131 degrees F, which suits hotter rooms.
Note: For dimming and syncing multiple fixtures, a Gavita EL Master Controller is required.
Sylvane's Expert Take
If you run a commercial facility or a serious home grow on Gavita Pro 1000e HPS fixtures, this light is the easiest way to move to LED, because your layout stays the same. Choosing a version is simple: match it to the wiring you already have. If your rooms run hot, go with the 277-400V version, since it is the only one rated to 131 degrees F. The 2.5 micromoles-per-joule efficacy is the number that pays you back every lighting cycle.
Specifications
Specifications
-
Heat Output (BTUs)2661
-
Total Output (PPF)1930
-
CertificationsUL, ANSI
-
Dimming Control TypeRequires Controller (Sold Separately)
-
Lighting TypeLED
-
System PPF Efficacy (μmol/joule)2.5
-
Maximum Amperage (Amps)6.6
-
Plug Face Type5-15P, 6-15P
-
Voltage (V)110-120208-240277-400
-
Watts (W)780
-
Depth (in.)11.8
-
Height (in.)3.9
-
Weight (lbs.)33.07
-
Width (in.)29.0
-
Additional FeaturesFull Spectrum, Dimmable, Applicable for Indoor Growing
-
Manufacturer's Warranty5-Year Warranty












