PhotonTek X 600W Pro LED Grow Light is backordered and will ship as soon as it is back in stock.
Description
Description
Not every grow space needs the same amount of light, and neither does every crop stage. With the PhotonTek X 600W Pro LED Grow Light, you clip in only the bars your space calls for, then turn the intensity down for young plants or up for flowering. Because the spectrum is full, the same fixture carries you from vegetative growth through harvest.
Heat is the hidden cost of most indoor growing. Compared with an HPS light of similar wattage, this LED fixture lets you run your space with 30 to 40 percent less HVAC capacity, so a smaller cooling setup can keep your tent in range. PhotonTek also reports crop yield gains of 30 to 60 percent.
Key Features and Benefits of the PhotonTek X 600W Pro LED Grow Light
- High PPF Output: A total output of 1620 µmole/s creates an even spread of light close to the canopy, so plants across your footprint grow more evenly.
- Efficient Light Delivery: System efficacy of 2.7 µmole/J means you get more usable plant light from every watt you pay to run.
- Magnetic Light Bars: The fixture uses 6 click-magnet LED bars rated at 100 watts each, which connect easily for fast setup or a quick reconfiguration.
- Built-In Dimmer: The included 0-10V driver dimmer has OFF, 25, 50, 75, and 100 percent settings, so you can match light intensity to each growth stage.
- IP65 Rating: An IP65 waterproof rating protects the fixture against the moisture and spray of a humid grow room.
- 60,000-Hour Lifespan: The LEDs are rated for 60,000 hours, giving you many grow cycles before replacement becomes a concern.
- Wide Light Spread: A 120-degree distribution spreads output across your canopy, which helps reduce dim spots near the edges.
- Twist Lock Driver: The 600-watt driver has Twist Lock capability, giving you a locking connection that is harder to pull loose by accident.
- Dual Voltage Support: The light runs on 110-120 or 277 volts, draws up to 5.3 amps, and has a 5-15P plug, so you can plan circuit loads ahead of time.
- CSA Certified: CSA certification shows the fixture has been tested to recognized electrical safety standards, which gives you confidence when it runs for long daily cycles.
Sizing the Light Bars to Your Tent
During vegetative growth, this grow light covers canopies from 4 x 4 feet up to 5 x 5 feet. In flower, plan on the full 5 x 5 feet, with all 6 bars installed. The frame measures 42.95 x 46.55 x 2.04-Inches (L x W x H), so confirm it fits inside your space before you hang it. In a smaller tent, you can run fewer bars to match the canopy.
Sylvane's Expert Take
If you're a home grower with a tent or spare-room setup, this light fits well because it scales to your space rather than locking you into one footprint. It performs best over an even canopy in a 5 x 5 feet tent, where all 6 bars can run at full power through flower.
The dimmer and removable bars matter most. Together they let you give seedlings soft light and give flowering plants full intensity from one fixture. Start low, step up as your plants fill out, and a single light can handle your whole cycle.
Specifications
Specifications
-
Heat Output (BTUs)2115
-
Total Output (PPF)1620
-
CertificationsCSA
-
Dimming Control Type0-10V
-
Flowering Footprint (ft.)5x5
-
Lighting TypeLED
-
System PPF Efficacy (μmol/joule)2.7
-
Veg Footprint (ft.)4 x 4 - 5 x 5
-
Maximum Amperage (Amps)5.3
-
Plug Face Type5-15P
-
Voltage (V)110-120, 277
-
Watts (W)600
-
Depth (in.)42.95
-
Height (in.)2.04
-
Weight (lbs.)29.76
-
Width (in.)46.55
-
Additional FeaturesFull Spectrum, Dimmable, Applicable for Indoor Growing
-
Manufacturer's Warranty5-Year Warranty



