King Electric 120V Pump House Heater
King Electric 120V Pump House Heater - 500W / Stainless Steel is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
Info & Guides
Info & Guides
King Electric 120V Pump House Heater
King Electric 120V Pump House Heater - 500W / Stainless Steel is backordered and will ship as soon as it is back in stock.
Description
Description
A frozen pump in the middle of winter can leave you without water and facing a costly repair. The King Electric 120V Pump House Heater pairs convection with radiant heat that metal equipment absorbs directly, so your pumps and valves stay warmer than air-only heating would keep them. It also limits moisture buildup around mechanical gear. You can choose a 500-watt or 1,000-watt model.
Lower-wattage models also suit electrical cabinets. There, steady warmth controls moisture and holds a minimum operating temperature, so your electronic equipment keeps running reliably. Because the heater plugs in on 110 to 120 volts, you can place it anywhere an outlet is within reach.
Key Features and Benefits of the King Electric 120V Pump House Heater
- Radiant Plus Convection: Combined radiant and convection heat warms metal pumps and valves directly, so your equipment stays protected even when the surrounding air is cold.
- Frost Protection Thermostat: A built-in manual thermostat adjusts from 40 to 90 degrees F, so you can hold equipment just above freezing without wasting energy.
- ETL Damp Listing: The heater is ETL listed for use in damp locations, so you can install it with confidence in humid pump houses.
- ASSE-1060 Compliant: Meets ASSE-1060 requirements, so you can use it in enclosures that must satisfy this plumbing enclosure standard.
- Superalloy Element: A corrosion-resistant superalloy heating element stands up to the constant moisture found in pump houses and similar wet spaces.
- 5-Year Warranty: King Electric stands behind the heater, and with no complicated moving parts, your upkeep stays minimal.
- 120-Volt Plug-In: Runs on 110 to 120 volts through a plug-in connection, so you can power it from a standard household outlet.
- Wall-Mountable Design: Mounts vertically on a wall, and 500-watt models also mount horizontally.
- Color Options: Choose gray or stainless steel to match your enclosure or the finish of nearby equipment.
- Made in USA: The heater is made in the USA with U.S. and global materials.
Choose Your Wattage for the Space You're Heating
Choose between 500-watt and 1,000-watt models, each offered in gray or stainless steel, depending on how much heat your enclosure needs.
- 500-Watt Model in Gray: Produces 1,706 BTU on 4.2 amps, measures 3.5 x 6.25 x 17-Inches (L x W x H), weighs 5 pounds, and mounts vertically or horizontally, which suits electrical cabinets and compact pump houses.
- 500-Watt Model in Stainless Steel: Produces 1,706 BTU on 4.2 amps, measures 3.5 x 6.25 x 17-Inches (L x W x H), weighs 5 pounds, and mounts vertically or horizontally, with a stainless steel finish for metal enclosures.
- 1,000-Watt Model in Gray: Doubles the output to 3,412 BTU on 8.33 amps, measures 3.5 x 5 x 17-Inches (L x W x H), and weighs 4 pounds, giving you more heat for larger or draftier pump houses.
- 1,000-Watt Model in Stainless Steel: Delivers 3,412 BTU on 8.33 amps, measures 3.5 x 5 x 17-Inches (L x W x H), and weighs 4 pounds, with a stainless steel finish for metal enclosures.
Sylvane's Expert Take
If you're protecting pumps or valves in an unheated outbuilding, this heater is a strong fit. It works best in small, damp enclosures where metal equipment can soak up its radiant heat. Set the thermostat near 40 degrees F for frost protection to keep energy use low.
Pick the 500-watt model for cabinets and compact pump houses, and the 1,000-watt model when the space is larger or poorly insulated. Either way, the ETL damp-location listing means you can install it where moisture is a given.
Specifications
Specifications
-
Number of Heat SettingsVariableVariable11
-
TypeWall-Mountable
-
CertificationsETL
-
ColorStainless SteelGrayStainless SteelGray
-
ControlsManual
-
Heating BTUs (BTUs)1706170634123412
-
Indoor/OutdoorOutdoorOutdoorIndoorIndoor
-
Maximum Amperage (Amps)4.24.28.338.33
-
Maximum Heating Amperage (Amps)4.2
-
Maximum Wattage (W)50050010001000
-
Power SupplyPlug-In
-
Voltage (V)110-120
-
Depth (in.)3.5
-
Height (in.)17.0
-
Weight (lbs.)5544
-
Width (in.)6.256.255.05.0
-
Additional FeaturesWall-Mountable, Tip-Over Protection, Automatic Overheat Protection, Has ThermostatWall-Mountable, Tip-Over Protection, Automatic Overheat Protection, Has ThermostatProgrammable Timer, Remote Control, Casters, Wall-Mountable, Carrying Handle, Tip-Over Protection, Automatic Overheat Protection, Applicable for Indoor Growing, Has ThermostatProgrammable Timer, Remote Control, Casters, Wall-Mountable, Carrying Handle, Tip-Over Protection, Automatic Overheat Protection, Applicable for Indoor Growing, Has Thermostat
-
Manufacturer's Warranty5-Year Limited Warranty
Key Specifications
General
Power
Dimensions
Additional Features
Warranty
- RRoccoRated 5 out of 5 stars4 years agoBest Heater Ever!
This heater was easy to install and looks great in my farm's pump house. Since installing, we haven't had to worry about our well freezing even on the coldest days of the year. Setting the temperature is easy and it has delivered on its promises so far.
