MRCOOL 18,000 BTU 1.5 Ton VersaPro Central Ducted Heat Pump Split System
MRCOOL 18,000 BTU 1.5 Ton VersaPro Central Ducted Heat Pump Split System - None / No Line Set is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
Info & Guides
Info & Guides
MRCOOL 18,000 BTU 1.5 Ton VersaPro Central Ducted Heat Pump Split System - None / No Line Set is backordered and will ship as soon as it is back in stock.
Description
Description
Ductwork already running through your home is the shortest path to whole-house comfort, and the MRCOOL VersaPro Central Ducted Heat Pump Split System puts it to work with a single air handler and outdoor condenser. Its inverter compressor varies speed to match demand instead of cycling on and off, which keeps temperatures steady across connected rooms. It comes with or without a supplemental heater kit, and with or without a pre-charged line set.
Heating runs in outdoor temperatures from -22 to 75 degrees F, and cooling keeps going from -22 all the way up to 122 degrees F, so a deep freeze or a heat wave won't shut your system down. Inside, the variable-speed blower moves 488.54 to 618.03 CFM. That is enough airflow for a smaller home or a dedicated zone of a larger house.
Key Features and Benefits of the MRCOOL 18,000 BTU 1.5 Ton VersaPro Central Ducted Heat Pump Split System
- Inverter Efficiency: Carries an 18.8 SEER2 and 11.0 EER2 rating, so energy bills stay lower through long cooling seasons.
- Heat Pump Capacity: Rated at 18,000 BTU for both heating and cooling in a 1.5-ton system, so one setup covers both seasons.
- R-454B Refrigerant: Uses a refrigerant with a much lower global warming potential than older formulas.
- Multi-Position Air Handler: Supports upflow and downflow installs, plus horizontal, so you can match the air handler to your home's layout and duct runs.
- Flexible Controls: Ships with a wired MRCOOL Smart Thermostat and a Follow Me remote control, and also works with any 24-volt third-party thermostat you prefer.
- Quiet Indoors: An indoor noise rating of 44 dB keeps the air handler from getting in the way of conversation or sleep.
- Service-Friendly Design: Modular construction and a removable filter make upkeep faster, while self-diagnostic mode flags potential issues before they grow.
- Certified Performance: ETL and AHRI certifications mean the system's safety and rated performance have been verified by an independent party.
- Voltage Requirement: Requires a 208-230-volt circuit, which your installer connects as part of the professional installation this system calls for.
- Air Handler Size: The air handler measures 21.02 x 17.52 x 45-Inches (L x W x H) and weighs 105.82 pounds, so confirm that your install space fits it.
- Condenser Size: The outdoor condenser measures 31.69 x 12.99 x 21.81-Inches (L x W x H) and weighs 77 pounds, which helps you plan where it will sit.
Choose Your Auxiliary Heat and Line Set Configuration
You set up the VersaPro along 2 axes: auxiliary heat (None, 5 kW, 8 kW, or 10 kW) and line set length (No Line Set, 15 feet, 25 feet, 35 feet, or 50 feet). Pick None if the heat pump alone will handle your heating. The 5 kW kit is the smallest backup. The 8 kW kit sits in the middle, and the 10 kW kit gives the most backup output for your coldest days.
Every line set option from 15 to 50 feet ships as a Quick Connect line set pre-charged with R-454B, which makes the refrigerant connection quicker for your installer. Choose No Line Set if your installer plans a custom run. The system supports line lengths up to 98.4 feet.
Sylvane's Expert Take
If you have ductwork serving a home or zone up to 800 square feet and want one system for heating and cooling, the VersaPro is a strong fit. Because the heat pump covers most winters on its own, the None configuration works well in milder regions, while a heater kit adds backup for long cold snaps. Pick the pre-charged line set length closest to your planned run so you don't pay for extra length. Its 18.8 SEER2 efficiency is the spec that keeps paying you back every month.
Specifications
Specifications
-
Energy Efficiency Ratio 2 (EER2)11
-
Mounting TypeFloor
-
Number of SpeedsVariable
-
Seasonal Energy Efficiency Ratio 2 (SEER2)18.8
-
Total Cooling Capacity (BTUs)18000
-
Total Heating Capacity (BTUs)18000
-
TypeCentral Split
-
Auxiliary HeatNoneNoneNoneNoneNone55558888101010105810
-
CertificationsETL, AHRI
-
ColorGray, White
-
Compressor TypeInverter
-
Heat ModeYes
-
Heating Seasonal Performance Factor 2 (HSPF2)9.4
-
Installation TypeProfessional Installation
-
Line Length OptionNo Line Set15 ft25 ft35 ft50 ft15 ft25 ft35 ft50 ft15 ft25 ft35 ft50 ft15 ft25 ft35 ft50 ftNo Line SetNo Line SetNo Line Set
-
Maximum Cubic Feet per Minute (CFM) (CFM)618.03
-
Maximum Indoor Noise Level (dB)44
-
Maximum Operating Temperature - Cooling (degrees F)122
-
Maximum Operating Temperature - Heating (degrees F)75
-
Minimum Operating Temperature - Cooling (degrees F)-22
-
Minimum Operating Temperature - Heating (degrees F)-22
-
Number of Tons1.5
-
Refrigerant TypeR-454B
-
California Residents⚠ WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov.
-
Maximum Amperage (Amps)20.0
-
Voltage (V)208-230
-
Included Line Length (ft.)No Line Set15253550152535501525355015253550No Line SetNo Line SetNo Line Set
-
Indoor Unit Depth (in.)17.52
-
Indoor Unit Height (in.)45
-
Indoor Unit Weight (lbs.)105.82
-
Indoor Unit Width (in.)21.02
-
Maximum Line Length (ft.)98.4
-
Outdoor Unit Depth (in.)12.99
-
Outdoor Unit Height (in.)21.81
-
Outdoor Unit Weight (lbs.)77
-
Outdoor Unit Width (in.)31.69
-
Additional FeaturesLine Set Included
-
Manufacturer's Warranty10-Year Limited Parts and Compressor Warranty













