XPOWER X-47ATR 3600 CFM 1/3 HP Professional Axial Air Mover
XPOWER X-47ATR 3600 CFM 1/3 HP Professional Axial Air Mover is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
Info & Guides
Info & Guides
XPOWER X-47ATR 3600 CFM 1/3 HP Professional Axial Air Mover is backordered and will ship as soon as it is back in stock.
Description
Description
Running more fans off fewer circuits is how you speed up a dry-out, and that is where the XPOWER X-47ATR 3600 CFM 1/3 HP Professional Axial Air Mover earns its spot on your truck. Its sealed, brushless induction motor keeps running on wet and contaminated job sites. Variable speed control lets you match airflow to the material you're drying.
Key Features and Benefits of the XPOWER X-47ATR 3600 CFM 1/3 HP Professional Axial Air Mover
- High-Volume Airflow: Its 1/3-horsepower motor moves up to 3600 CFM, pulling moisture out of soaked carpet and baseboards so your drying times stay short.
- Low Amp Draw: The fan draws only 2.8 amps at 110-120 volts, which leaves room on your circuit to run more air movers at once.
- Sealed Induction Motor: The brushless motor is sealed against moisture and contaminants, so you can run it safely on water damage and contaminated job sites.
- Daisy-Chain Outlets: Built-in outlets let you connect up to 3 air movers together, which means fewer extension cords on larger drying or ventilation jobs.
- Air Fin Grille: The Air Fin grille design carries the focused airflow stream up to 60 feet, so it reaches across long rooms and hallways.
- Rotating Metal Stand: The included metal rack rotates 360 degrees so you can aim precisely, or you can lift the fan off and set it on any level surface.
- Shutoff Timer: A 3-hour off timer powers the fan down on its own, so you can leave jobs that need little oversight.
- Thermal Protection: Dual thermal protection shuts the motor off automatically if it overheats, so you can run it unattended with confidence.
- Long Power Cord: A 20-foot heavy-duty power cord lets you place the fan almost anywhere on the job site without hunting for an outlet.
- ETL Certified: ETL and cETLus certifications confirm the fan has been tested to recognized electrical safety standards.
- Xactimate Code: The fan is listed under Xactimate code WTRDRY+, which makes it easier to document equipment on your restoration estimates.
Sizing Up the X-47ATR for Your Job Site
At 21.9 x 9.8 x 22.5-Inches (L x W x H), the X-47ATR is narrow enough to sit along baseboards and in tight hallways without blocking your path. It weighs 22.2 pounds, so you can carry it from room to room by the built-in handle while the wrap-around cord stays tucked out of the way. When the job wraps up, you can stack up to 5 of these air movers high, which keeps a full set compact in your truck or warehouse.
Sylvane's Expert Take
If you run water damage jobs and your power is limited, the X-47ATR fits your workload well. It does its best work in multi-room dry-outs, where the low amp draw and daisy-chaining let you cover more ground from 1 outlet. The 20-foot cord and stackable design add flexibility when space is tight. For crews that want more drying power per circuit, it's an easy fan to standardize on.
Specifications
Specifications
-
Number of SpeedsVariable
-
TypeAxial Air Mover
-
CertificationsETL, cETLus
-
ColorBlue
-
ControlsManual
-
Drying ApplicationCarpet, Floor/Baseboard, Wall
-
Maximum Cubic Feet per Minute (CFM) (CFM)3600.0
-
XACTIMATE CodeWTRDRY+
-
Maximum Amperage (Amps)2.8
-
Power Cord Length (ft.)20
-
Voltage (V)110-120
-
Depth (in.)21.9
-
Height (in.)22.5
-
Weight (lbs.)22.2
-
Width (in.)9.8
-
Additional FeaturesStackable, Daisy-Chainable
-
Manufacturer's Warranty1-Year Limited Warranty







