TPI CE20DS 20-In. 2-Speed 1/4 HP Direct Drive Shutter Mounted Exhaust Fan
TPI CE20DS 20-In. 2-Speed 1/4 HP Direct Drive Shutter Mounted Exhaust Fan is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
TPI CE20DS 20-In. 2-Speed 1/4 HP Direct Drive Shutter Mounted Exhaust Fan is backordered and will ship as soon as it is back in stock.
Description
Description
Stale, overheated air builds up fast in garages, warehouses, and production floors, and it seldom clears on its own. The TPI CE20DS 20-In. 2-Speed 1/4 HP Direct Drive Shutter Mounted Exhaust Fan gives you a wall-mounted way to push that air outside, even in the harsh conditions common to commercial and industrial buildings. Its direct-drive design connects the motor straight to the blades, so you have no belts to adjust or replace.
Key Features and Benefits of the TPI CE20DS 20-In. 2-Speed 1/4 HP Direct Drive Shutter Mounted Exhaust Fan
- 2-Speed Airflow: Move 2,380 CFM on low or 2,925 CFM on high, so you can match exhaust volume to the heat or fumes in your space.
- Direct-Drive Motor: A 1/4-horsepower motor spins the blades at up to 1,140 RPM, giving you steady airflow with no belt slippage to manage.
- Enclosed PSC Motor: The totally enclosed, permanently lubricated split capacitor motor never needs oiling, which keeps your routine maintenance to a minimum.
- Guarded Aluminum Blades: Durable 20-inch aluminum blades sit behind steel spiral wire guards, helping keep hands and debris away from moving parts.
- Simple Speed Control: Change between the 2 speed settings with the pull chain or toggle switch control, so adjusting airflow takes only seconds.
- Hardwired Power: The fan needs a 120-volt, 1-phase hardwired connection, drawing up to 2.3 amps, and a no-cord junction box is included for direct wiring.
- Made in USA: TPI builds this exhaust fan in the USA using a mix of domestic and foreign components.
Planning the Wall Opening and Mounting Load
You install the CE20DS entirely from inside the building, with no external framing or separate shutters to fit. You'll cut a 20.5-inch square opening, and the gray steel housing, at 7.18 x 23.125 x 23.125-Inches (L x W x H), overlaps that opening on every side. Its shallow profile keeps the fan close to the wall. The fan weighs 34 pounds, so check that the framing around your cutout can carry that load before you mount it.
Sylvane's Expert Take
If you run a warehouse, garage, or industrial space where heat or fumes collect along an interior wall, this TPI fan suits the job. It works best where an electrician can hardwire it close to the opening. Pay attention to the low setting: at 2,380 CFM it still moves a substantial volume of air, so high speed is there for heavier loads. With its sealed, permanently lubricated motor, you get exhaust ventilation that asks very little of you once it's on the wall.
Specifications
Specifications
-
Number of Speeds2
-
TypeShutter Exhaust Fan
-
ApplicationCommercial/Industrial
-
ColorGray
-
ControlsToggle Switch
-
Housing MaterialSteel
-
Maximum Cubic Feet per Minute (CFM) (CFM)2925.0
-
Maximum RPM1140
-
California Residents⚠ WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.p65warnings.ca.gov.
-
Maximum Amperage (Amps)2.3
-
Power SupplyPlug-In
-
Voltage (V)110-120
-
Ceiling or Wall Cutout Length (in.)20.5
-
Ceiling or Wall Cutout Width (in.)20.5
-
Depth (in.)7.18
-
Height (in.)23.125
-
Shutter Fan Size (in.)20
-
Weight (lbs.)34
-
Width (in.)23.125
-
Manufacturer's Warranty1-Year Limited Warranty


