Simplifire Built-In Electric Fireplace
Simplifire Built-In Electric Fireplace - 30-In. is backordered and will ship as soon as it is back in stock.
Description
Description
Most of the work on a built-in fireplace happens at the wall, and the SimpliFire Built-In Electric Fireplace keeps that part simple. There are no visible heat vents or mesh screen across the front, so you can run brick, drywall, or tile right up to the edge for a clean finish. Inside, a masonry-style interior and textured log set give the firebox a traditional look.
You can set it into a straight wall or a corner, in new construction or an existing fireplace. The flames run with or without heat, so you can enjoy the fire in July just as easily as in January.
Key Features and Benefits of the SimpliFire Built-In Electric Fireplace
- Dual-Voltage Wiring: You can hardwire it for 120-volt operation at 4,800 BTU or 240-volt operation at 10,000 BTU, so heat output matches the circuit you have.
- Programmable Thermostat: You can set the temperature from 61 to 82 degrees F, and the zone heat keeps the room you're in comfortable while cutting energy costs.
- 9-Hour Timer: You can set run time in 30-minute steps from a half-hour up to 9 hours, so the fireplace turns off on your schedule.
- 4 Flame Heights: You can cycle through the flame levels using the button on the fireplace or the included remote control to get the look you want.
- Included Plug Assembly: A plug assembly comes in the box for 120-volt use, so you can run the fireplace from an outlet without hardwiring.
- Overheat Protection: A cut-off switch shuts the heater off if the temperature climbs to an unsafe level, and the fireplace is CSA certified.
- Long-Life LEDs: The LED flame and lighting technology is rated for more than 100,000 hours, so the flame effect lasts through years of nightly use.
Choose Your Size
The 2 sizes differ in footprint and in how much room area each one heats best.
- 30-Inch Model: The smaller option measures 31 x 11.75 x 26.75-Inches (L x W x H) and weighs 35 pounds, and it's recommended for rooms up to 375 square feet.
- 36-Inch Model: The larger option measures 37 x 11.81 x 31.25-Inches (L x W x H) and weighs 40 pounds, giving you a bigger flame display for rooms up to 400 square feet.
Sylvane's Expert Take
If you're finishing a living room or den and want a fireplace that disappears into the wall, this one fits well, especially in rooms of 375 to 400 square feet. Plan the voltage early. The 240-volt hardwired connection more than doubles heat output compared with 120-volt, so bring in your electrician before the wall is closed up. Focus on the flush front and the programmable thermostat, and you get a fireplace that looks built in and heats on your schedule.
Specifications
Specifications
-
Number of Heat SettingsVariable
-
TypeBuilt-InBuilt-In, Wall-Mountable
-
CertificationsCSA
-
ColorBlack
-
ControlsElectronic
-
Design TypeModern
-
Flame Bed TypeLog Set
-
Heating BTUs (BTUs)240
-
Recommended Coverage Area (sq. ft.)375400
-
California Residents⚠ WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov.
-
Maximum Amperage (Amps)12.5
-
Maximum Wattage (W)2800
-
Power SupplyPlug-In, Hardwired
-
Voltage (V)110-120, 220-240
-
Assembled Depth (in)11.7511.81
-
Assembled Height (in.)26.7531.25
-
Assembled Width (in.)3137
-
Total Weight (lbs)3540
-
Additional FeaturesProgrammable Timer, Remote Control, Adjustable Flame, Flame-Only Mode, Assembly Required, Automatic Overheat Protection
-
Manufacturer's Warranty2-Year Warranty
