Rikon 450 CFM Air Filtration System for Woodworking
Rikon 450 CFM Air Filtration System for Woodworking is backordered and will ship as soon as it is back in stock.
Have a question or need a quote? Ask Our Experts
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
- Rikon 62-450 Air Filtration System
- Remote Control
- Inner Filter and Outer Filter
- All Installation Hardware
- Owner's Manual
Info & Guides
Info & Guides
Description
Description
The Rikon Air Filtration System is designed to circulate air and filter wood and other non-metallic dust. This durable system features a 20-gauge steel cabinet and can be installed hanging from the ceiling or mounted on a bench.
- Coverage Area: It is designed to filter rooms up to 400 square feet up to 8 times per hour. For larger areas, two systems are recommended for optimal filtration.
- Timer: After you finish for the day, program the system to provide one, two, or four hours of runtime before automatically shutting off.
- Filtration: The inner and outer filters remove dust between 1 and 5 microns.
- Air Speed: Includes three air speeds of low, medium, and high.
- Remote Control: Power the filtration system on or off, set the timer, and adjust the airflow control using the convenient remote control.
Easy to Install
The air filtration system includes all the hardware required to install it.
- Rubber feet for bench installation (4)
- Hanging chains (4)
- Hangers and locknuts (4)
- Wood screw hooks (4)
Where to Place the System
Placement is of primary importance for this air filtration system, whether suspended from the ceiling or mounted on a bench.
- Central Location: Place the filtration system in a central location above or near an area where a lot of sanding or lathing is done.
- Avoid Obstruction: Mount 7 to 8 feet away from corners, tall cabinets, or heating/cooling vents that would restrict airflow.
- Level: Ensure the system is horizontally level and at least 7 feet above the floor
Additional Specifications
- Motor:1/4 Horsepower Motor
- Power: 120-volt,1.5 A, 60 Hz, Single-phase
- Airflow: 250 CFM (Low), 350 CFM (Medium), 450 CFM (High)
Summary
This system can be installed suspended from the ceiling or mounted on a bench and is designed to provide filtration for rooms up to 400 square feet. It features two filters, three fan speeds, a programmable timer, a convenient remote control, and all installation materials.
Specifications
Specifications
-
Filtration SystemPre-Filter
-
Manufacturer-Suggested Room Size (sq. ft.)400
-
Number of Speeds3
-
TypePortable, Air Scrubber
-
California Residents⚠ WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. For more information go to www.P65Warnings.ca.gov/wood.www.p65warnings.ca.gov.
-
ColorCream
-
ControlsManual
-
Maximum Cubic Feet per Minute (CFM) (CFM)450.0
-
Maximum Noise Level (dB)68
-
Number of Filters to Change2
-
Ozone EmissionNone
-
Pre-Filter TypeMERV 8
-
Recommended ForCommercial/Industrial, Woodworking
-
Amperage (Amps)1.5
-
Voltage (V)110-120
-
Depth (in.)19.75
-
Depth (with front cover) (in.)19.75
-
Height (in.)10.0
-
Height (with front cover) (in.)10.0
-
Weight (lbs.)28.5
-
Width (in.)16.75
-
Width (with front cover) (in.)16.75
-
Additional FeaturesProgrammable Timer, Remote Control
-
Manufacturer's Warranty5-Year Limited Warranty