PURAERO 1/3 HP 2.44A Air Mover

SKU: pe13439 | Model: PA-330-AM-GN

$204⁰⁰

Option

Green Red Blue

Have a question or need a quote? Ask Our Experts

Live Chat | 1 (800) 934-9194 | Email

Manufacturer's Warranty

1-Year Warranty

What's In The Box?

PURAEROPA-330-AM 1/3 HP Air Mover
Owner's Manual

Info & Guides

Owner's Manual

Description

Soaked carpet and wet drywall need steady airflow aimed right at the problem. The PURAERO 1/3 HP 2.44A Air Mover (model PA-330-AM) gives you that, and its rotomolded housing and sealed motor hold up to the knocks of restoration and construction work. At 24.3 pounds, you can carry it from room to room and job to job.

How you position it changes the job it does. Lay the PA-330-AM flat to dry carpets and baseboards, or tilt it to a 45-degree angle for wallboard and fresh paint. Stand it at 90 degrees to aim at ceilings or crawl space subfloors. With those positions, 1 air mover covers several drying tasks instead of needing a dedicated fan for each.

Key Features and Benefits of the PURAERO 1/3 HP 2.44A Air Mover

Strong Airflow: The 1/3-horsepower motor moves up to 2,550 CFM, pushing a strong stream of air across wet flooring so it dries faster.
Low Amp Draw: It runs at only 2.44 amps and 270 watts, which helps you run more drying equipment from the circuits you have on site.
Daisy-Chain Outlets: Each air mover has 2 on-board GFCI outlets that let you daisy-chain up to 3 of them, so you need fewer cords and wall outlets on larger jobs.
Speed Settings: Manual controls give you 3 fan speeds, so you can match the airflow to how wet the area is.
Sealed Motor: The motor is sealed and lubricated for long life, which suits the damp conditions of water damage work.
Rotomolded Housing: The housing is industry-standard rotomolded plastic instead of injection-molded plastic, so you get a durable shell that still weighs only 24.3 pounds.
Stackable Design: You can stack up to 4 of these air movers in a truck or van, which saves cargo space between jobs.
Cord Reach: The 25-foot power cord lets you place the air mover where the water is, not just next to the nearest outlet.
ETL Certified: ETL and cETL certification confirms the air mover has been tested to recognized electrical safety standards for job site use.
68 dB Output: It is rated at 68 decibels on high speed, so you know what to expect when you run it inside an occupied home.
Color Options: You can choose green, red, or blue, which makes it easy to color-code your equipment by crew or by job.

Planning Power and Placement for a Multi-Fan Setup

The PA-330-AM runs on 110-120 volt power, so you can plug it into ordinary household outlets at the loss site. Because the amp draw is low, chaining 3 air movers through the on-board GFCI outlets lets you set up a drying line along a hallway or across a large room from a single starting point.

At 17.31 x 15.71 x 17.71-Inches (L x W x H), the housing is compact enough to set in tight spaces where wet subfloor or drywall needs focused airflow.

Sylvane's Expert Take

If you're a restoration contractor or a homeowner drying out after a leak, this air mover makes the most sense on jobs where you need several fans and have only a few outlets. Daisy-chaining 3 together at 2.44 amps each is its biggest practical advantage.

All 3 colors run the same motor and deliver the same airflow, so color only affects how you organize your equipment. Choose 1 color per crew, and you'll spend less time sorting gear at the end of the job.