FREE Shipping Over $45*

0% APR 1yr financing with Affirm*
1 3

TPI CE16DS 16-In. 3-Speed 1/8 HP Direct Drive Shutter Mounted Exhaust Fan

SKU: tp13500  |  Model: CE 16-DS
$50200

Have a question or need a quote? Ask Our Experts

Live Chat | 1 (800) 934-9194 | Email

Manufacturer's Warranty

1-Year Limited Warranty

What's In The Box?
  • TPI CE16DS 16-In. 3-Speed 1/8 HP Direct Drive Shutter Mounted Exhaust Fan
  • Owner's Manual
  • No-Cord Junction Box

Description

Heat and fumes build up fast in a closed garage. A fan that needs exterior framing turns a simple fix into a carpentry project. The TPI CE16DS mounts from inside the wall, so you only work at the opening itself. Its direct-drive motor turns the blade directly, so there are no belts to adjust or replace.

The CE16DS isn't limited to commercial and industrial buildings. It also suits homes where heat or moisture lingers in attics and basements. Even on its low setting, it moves more than 1,500 CFM.

Key Features and Benefits of the TPI CE16DS 16-In. 3-Speed 1/8 HP Direct Drive Shutter Mounted Exhaust Fan

  • 3-Speed Airflow: Each setting moves 1,700 CFM on low, 1,900 on medium, and 2,100 on high, so you can match the exhaust to how much heat your space holds.
  • Direct-Drive Motor: The 1/8-horsepower motor spins up to 1,660 RPM and draws a maximum of 2.1 amps, keeping its load on your circuit modest.
  • Speed Controls: You can switch between the 3 speeds with either the pull chain or the toggle switch.
  • Enclosed PSC Motor: The fully enclosed, permanently lubricated split capacitor motor reduces the need for routine oiling, which cuts your upkeep.
  • Guarded Aluminum Blades: Steel spiral wire guards protect the 16-inch aluminum fan blades and keep hands and debris away from moving parts.
  • Inside-Wall Installation: The fan mounts from inside the wall into a square cutout measuring 16.5 inches per side, so you don't need external framing or separate shutters.
  • Junction Box Wiring: The fan runs on 110-120-volt single-phase power, and the included no-cord junction box lets you wire it directly.
  • Steel Housing: The 18-pound gray steel housing holds up to the grime of garages and industrial buildings.
  • Made in USA: TPI builds the CE16DS in the USA using domestic and foreign components.

Planning the Wall Opening for Your CE16DS

Before you cut, plan around the fan's 19.125 x 7.18 x 19.125-Inches (L x W x H) footprint and the 16.5-inch opening. Confirm your wall can accommodate the 7.18 inches of depth before you start. Position the opening near your power source, since the fan connects directly through its junction box. The fan weighs 18 pounds, so plan for that weight when you set it in place.

Sylvane's Expert Take

If you're dealing with a hot garage or a damp basement, this fan is a solid fit. Its biggest advantage is the inside-wall installation, which saves you from framing work outside the wall. The 3 speeds matter most day to day: run low for steady air exchange, then switch to 2,100 CFM when the space heats up. If you want a fan that needs little upkeep and no outdoor framing, the CE16DS is a strong pick.

Specifications

    Key Specifications

    • Number of Speeds
      3
    • Type
      Shutter Exhaust Fan

    General

    • Application
      Residential, Garage/Workshop, Basement, Crawlspace, Commercial/Industrial, Attic
    • Color
      Gray
    • Controls
      Toggle Switch
    • Housing Material
      Steel
    • Maximum Cubic Feet per Minute (CFM) (CFM)
      2100.0
    • Maximum RPM
      1660
    • California Residents
      ⚠ WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.p65warnings.ca.gov.

    Power

    • Maximum Amperage (Amps)
      2.1
    • Power Supply
      Plug-In
    • Voltage (V)
      110-120

    Dimensions

    • Ceiling or Wall Cutout Length (in.)
      16.5
    • Ceiling or Wall Cutout Width (in.)
      16.5
    • Depth (in.)
      7.18
    • Height (in.)
      19.125
    • Shutter Fan Size (in.)
      16
    • Weight (lbs.)
      18
    • Width (in.)
      19.125

    Warranty

    • Manufacturer's Warranty
      1-Year Limited Warranty

Customer Reviews