FREE Shipping Over $45*

0% APR 1yr financing with Affirm*
1 3

TPI CE18DS 18-In. 3-Speed 1/8 HP Direct Drive Shutter Mounted Exhaust Fan

SKU: tp13501  |  Model: CE 18-DS
$55300

Have a question or need a quote? Ask Our Experts

Live Chat | 1 (800) 934-9194 | Email

Manufacturer's Warranty

1-Year Limited Warranty

What's In The Box?
  • TPI CE18DS 18-In. 3-Speed 1/8 HP Direct Drive Shutter Mounted Exhaust Fan
  • Owner's Manual
  • No-Cord Junction Box

Description

Hanging an exhaust fan shouldn't mean working from a ladder outside the building. The TPI CE18DS 18-In. 3-Speed 1/8 HP Direct Drive Shutter Mounted Exhaust Fan goes into the wall from the inside. Because it mounts from indoors, you don't need external framing or shutters.

Inside the steel housing, a direct-drive motor turns the blades at up to 1,660 RPM, and you choose how hard it works. Leave it on low to keep a closed garage fresh. Switch to high when a commercial work area starts holding heat.

Key Features and Benefits of the TPI CE18DS 18-In. 3-Speed 1/8 HP Direct Drive Shutter Mounted Exhaust Fan

  • 3 Speed Settings: Low (1,850 CFM), Medium (2,100 CFM), and High (2,300 CFM) let you match airflow to the size and heat load of your space.
  • Direct-Drive Motor: A 1/8-horsepower motor spins the fan at up to 1,660 RPM with no belts for you to adjust or replace.
  • Inside-Wall Installation: The fan mounts from indoors into an 18.5-inch square wall cutout, so you skip the external framing and separate shutters.
  • Simple Speed Control: A pull chain and toggle switch control let you move between the 3 speeds right at the fan.
  • Guarded Aluminum Blades: The 18-inch aluminum blades are protected by steel spiral wire guards.
  • Hardwired Power: The fan runs on a 110 to 120-volt, 1-phase hardwired connection through the included no-cord junction box and draws a maximum of 2.2 amps.
  • Steel Housing: The gray steel housing weighs 25 pounds, so plan for solid wall framing around the opening.
  • Shallow Profile: The fan measures 7.18 x 21.125 x 21.125-Inches (L x W x H), so it stays close to the wall and out of your work area.

Choosing the Right Speed for Your Garage or Facility

The CE18DS spans 450 cubic feet per minute from low to high, about a 24 percent increase when you need extra air turnover. Low is best for running all day in an enclosed garage, where you want steady fresh air without the full motor output. Medium covers most working hours in a busy commercial space, and high is for hot afternoons or after jobs that leave the air heavy.

Since the 18.5-inch square cutout is the only opening you make, put the fan on a wall that leads straight outdoors. A spot opposite a door or window lets replacement air flow in as the fan pushes stale air out.

Sylvane's Expert Take

If you're ventilating a garage or a commercial work area and don't want to work outside the building, this TPI shutter fan fits the job well. It works best on an exterior wall where you can cut the opening cleanly and run 120-volt power to it. The fan has no cord, so bring in an electrician if you aren't comfortable wiring a junction box. Mounting from the inside means one easy install, and 3 speeds let you adjust airflow every day.

Specifications

    Key Specifications

    • Number of Speeds
      3
    • Type
      Shutter Exhaust Fan

    General

    • Application
      Garage/Workshop, Commercial/Industrial
    • Color
      Gray
    • Controls
      Toggle Switch
    • Housing Material
      Steel
    • Maximum Cubic Feet per Minute (CFM) (CFM)
      2300.0
    • Maximum RPM
      1660
    • California Residents
      ⚠ WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.p65warnings.ca.gov.

    Power

    • Maximum Amperage (Amps)
      2.2
    • Power Supply
      Plug-In
    • Voltage (V)
      110-120

    Dimensions

    • Ceiling or Wall Cutout Length (in.)
      18.5
    • Ceiling or Wall Cutout Width (in.)
      18.5
    • Depth (in.)
      7.18
    • Height (in.)
      21.125
    • Shutter Fan Size (in.)
      18
    • Weight (lbs.)
      25
    • Width (in.)
      21.125

    Warranty

    • Manufacturer's Warranty
      1-Year Limited Warranty

Customer Reviews