B-Air VP-X34 Air Mover
B-Air VP-X34 Air Mover - Green is backordered and will ship as soon as it is back in stock.
Description
Description
Water damage jobs rarely stop at one room, and the VP-X34 is built for that. Its roto-molded body stacks for transport and storage. It also links with other VP-X34s, so you can cover a flooded basement or a run of soaked hallways from a single household circuit.
The work doesn't end at wet carpet and walls. The VP-X34 also speeds the drying of concrete, glue, paint, and stained finishes, so the same air mover keeps working on finish and coating jobs between water losses.
Key Features and Benefits of the B-Air VP-X34 Air Mover
- High CFM Airflow: A 1/3-horsepower motor moves up to 2,530 CFM of air across saturated carpet and floors, so wet materials dry sooner.
- Low Power Draw: It draws just 2.9 amps and 246 watts on 110-120 volts, which leaves room on the circuit for more air movers.
- Daisy-Chain Capability: Interlocking air intake grilles and a 12-amp on-board circuit breaker let you run up to 4 air movers from one GFCI outlet.
- GFCI Safety Protection: A GFCI safety plug and an on-board GFCI safety outlet help protect you and your crew from shock in wet conditions.
- Thermal Cutoff: Thermal cutoff protection shuts the motor down if it overheats, which guards against damage during long drying runs.
- Dual Speed Settings: Manual controls give you 2 speeds, so you can run full velocity on soaked materials and dial back as they dry.
- Multiple Operating Angles: Set it horizontal or tilt it to 45 or 90 degrees, so you can aim airflow along floors and baseboards or up a wall.
- Roto-Molded Casing: The heavy-duty roto-molded housing stands up to jobsite knocks, and the carrying handle makes it easy to move from room to room.
- 25-Foot Cord: The power cord reaches across large rooms, so you have more freedom in where you place each air mover.
- ETL Certified: ETL certification means the air mover has been independently tested to recognized electrical safety standards, which gives you peace of mind on the job.
- Xactimate Code WTRDRY: The listed Xactimate code WTRDRY makes insurance estimating and billing for your restoration jobs simpler.
- Color Options: Choose from green, blue, or red to color-code your equipment across crews or jobsites.
Planning Your VP-X34 Setup on One Circuit
Running 4 VP-X34s together puts roughly 11.6 amps on the line, which stays under the 12-amp on-board breaker and within a standard 15-amp household circuit. That matters on residential losses where you may have only a few working outlets, because one circuit can power a full chain covering a basement or open living area. Plan on 26 to 29 pounds per air mover depending on model, so you can carry one in each hand from the van. The compact footprint also lets you stack several in a closet or truck bed between jobs.
Sylvane's Expert Take
If you run a restoration or commercial drying crew, the VP-X34 belongs in your fleet as a carpet and floor dryer. It performs best on whole-room losses, where the low 2.9-amp draw lets you chain 4 air movers on one circuit and run fewer cords. Every color shares the same motor and safety protection, so choose based on how you organize your fleet. Set out a chain and get your next job dry sooner.
Specifications
Specifications
-
Number of Speeds2
-
TypeCentrifugal Air Mover
-
CertificationsETL
-
ColorGreenBlueRed
-
ControlsManual
-
Drying ApplicationFloor/Baseboard, Carpet, Wall
-
Maximum Cubic Feet per Minute (CFM) (CFM)2530.0
-
XACTIMATE CodeWTRDRY
-
Horsepower (hp)0.33
-
Horsepower (hp)0.33
-
Maximum Amperage (Amps)2.9
-
Maximum Wattage (W)246
-
Power Cord Length (ft.)25
-
Voltage (V)110-120
-
Depth (in.)16.014.014.0
-
Height (in.)15.515.015.0
-
Weight (lbs.)262929
-
Width (in.)14.516.016.0
-
Additional FeaturesGFCI Safety Plug, Thermal Cutoff Protection, Stackable, Daisy-Chainable, On-Board GFCI Safety Outlet(s)
-
Manufacturer's Warranty1-Year Warranty on parts, labor, and 1-way shipping; 5-Year Warranty on Housing
Key Specifications
General
Power
Dimensions
Additional Features
Warranty
Recommended Accessories
Shop All B-Air Air Movers & Axial Fans Accessories-
Injectidry Systems
Direct-it In Universal Air Mover for Axial Airmovers (UAA1)
Regular price $75800Unit priceUnavailable -
-
- CCynthiaVerified BuyerRated 5 out of 5 stars1 year agoI recommend the B-Air VP-X34 Air Mover!
We live in Minnesota, so snow for 5-7 months of the year. Our garage is heated but does not have a floor drain so the snow and ice melts onto the garage floor...we use the air mover to dry the floor...which it does very well!
