XPOWER X-12 1/2 HP Confined Space 12-In. Industrial Fan
XPOWER X-12 1/2 HP Confined Space 12-In. Industrial Fan is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
Info & Guides
Info & Guides
XPOWER X-12 1/2 HP Confined Space 12-In. Industrial Fan is backordered and will ship as soon as it is back in stock.
Description
Description
Crawl spaces and sewer access points rarely get natural air movement, so moisture and fumes stay trapped where you have to work. The XPOWER X-12 lets you push fresh air in or pull stale air out. Its variable speed control sets how hard the fan runs for the job in front of you.
On restoration jobs, you can use this axial air mover for structural drying and to limit cross contamination during smoke, flood, and mold remediation. You can also set it up in open areas like hallways or gyms to create negative pressure and keep air moving.
Key Features and Benefits of the XPOWER X-12 1/2 HP Confined Space 12-In. Industrial Fan
- Variable Speed Control: A manual variable speed knob adjusts airflow up to 2,600 CFM, so you can match the output to your drying or exhaust task.
- Low Amp Draw: The fan draws 6 amps and up to 690 watts on 110-120-volt power, which keeps its load on your jobsite circuit modest.
- Thermal Overload Protection: Dual thermal overheat protection guards the 1/2-horsepower motor and helps you avoid burnout during extended drying runs.
- Portable Build: At 23.4 pounds with an integrated carry handle, the fan is easy to move between job sites and through tight access points.
- Long Power Cord: A 20-foot power cord with a built-in cord wrap lets you place the fan far from the outlet and store the cord neatly afterward.
- ABS Housing: An injection-molded ABS housing holds up to jobsite handling, so the fan gives you years of service.
- ETL-CETL Certified: The fan carries ETL-CETL certification for safety and efficiency, so you can check its safety credentials before use.
- Compact Footprint: At 15 x 13.6 x 18-Inches (L x W x H), the 12-inch fan takes up little room in your truck or storage area.
- Xactimate Code WTRDRY+: The fan is listed under Xactimate code WTRDRY+, so you can easily document it on water damage restoration estimates.
Sizing the X-12 for Your Confined Space
The X-12 is rated for confined areas up to 125 square feet, whether you are drying the space or exhausting air from it. That makes it a good fit for a crawl space or manhole where you need to clear vapor or moisture before and during work. In larger open rooms, use it as a negative-pressure and circulation fan rather than counting on it for full-room drying. Turn the speed knob down for a gentle, steady air exchange, or raise it when fumes or humidity need to clear fast.
Sylvane's Expert Take
If you're a restoration contractor or utility worker who regularly enters crawl spaces and sewers, the X-12 deserves a spot on your truck. It works best in enclosed areas up to 125 square feet, where you can switch it from aggressive exhaust to a steady fresh-air supply without changing equipment. Few confined space fans this size offer variable speed, and that is the X-12's biggest advantage. Together, the low amp draw and thermal protection let you run long drying cycles without worrying about the motor or the circuit, which makes it an easy fan to rely on job after job.
Specifications
Specifications
-
Number of SpeedsVariable
-
TypeAxial Air Mover
-
CertificationsETL
-
ColorBlue
-
ControlsManual
-
Drying ApplicationConfined Spaces, Construction/Utility
-
Maximum Cubic Feet per Minute (CFM) (CFM)2600.0
-
XACTIMATE CodeWTRDRY+
-
Horsepower (hp)0.5
-
Horsepower (hp)0.5
-
Maximum Amperage (Amps)6
-
Maximum Wattage (W)690
-
Power Cord Length (ft.)20
-
Voltage (V)110-120
-
Depth (in.)15.0
-
Duct Diameter (in.)12.0
-
Fan Diameter (in.)12.0
-
Height (in.)18.0
-
Weight (lbs.)23.4
-
Width (in.)13.6
-
Additional FeaturesThermal Cutoff Protection
-
Manufacturer's Warranty1-Year Warranty







