XPOWER Axial Air Mover w/ Ozone Generator
XPOWER Axial Air Mover w/ Ozone Generator - M-25 is backordered and will ship as soon as it is back in stock.
Description
Description
After a flood, you may be dealing with 2 problems at once: wet surfaces and lingering odor. The XPOWER Axial Air Mover w/ Ozone Generator handles both. It sends focused airflow at damp areas, and its ozone generator runs on a separate switch for vacant hotel rooms, restaurants, and meeting rooms.
Ozone can harm people and pets, so the generator has its own power switch and an indicator light that shows you when it's running. Because the 2 functions are separate, you can run the fan by itself for drying while people are in the room. Once everyone has left, you can switch on ozone treatment.
Key Features and Benefits of the XPOWER Axial Air Mover w/ Ozone Generator
- Brushless DC Motor: A brushless DC motor pushes up to 1,450 CFM, which gives you enough air volume to circulate air through and dry an entire room.
- Spiral Grille Airflow: Fan blades paired with a spiral grille send air farther in a focused stream, so drying power lands where you aim it.
- 360-Degree Adjustment: The head rotates a full 360 degrees and tilts to any angle, so you can aim air at the floor or at the ceiling.
- Programmable Timer: You can set run time from 30 minutes to 3 hours, and the air mover shuts off by itself when the timer reaches 0.
- Variable-Speed Switch: A variable-speed switch lets you turn airflow up for fast drying or down for gentler room circulation.
- Stackable Design: At 12.6 pounds, the fan stacks on its sides and has a built-in handle, so you can carry several to a job site at once.
- Compact Footprint: Measuring 15.4 x 8.8 x 17.2-Inches (L x W x H), the fan's footprint helps you plan placement in a crowded room.
- GFCI Safety Plug: A GFCI safety plug on the 6 feet long cord helps protect you on wet restoration jobs, and a cord wrap keeps it tidy during transport.
- ETL and OSHA: The fan is ETL-listed and meets OSHA standards, so you can use it on commercial job sites with confidence.
- Plug-In Power: Runs on 110 to 120 volts, so it plugs into a standard wall outlet.
M-27 vs M-25: Choose Your Ozone Configuration
You can choose between the M-27 and M-25 models, which pair the same air mover with different ozone generator sizes and power draws.
- M-27: The M-27 draws up to 1.5 amps and 145 watts, the higher electrical load of the 2 models, which is worth planning for when you run several fans on one circuit.
- M-25: The M-25 draws up to 1.2 amps and 138 watts, giving you a slightly lighter load when several fans share the same circuit.
Sylvane's Expert Take
If you run a restoration or cleaning business that handles flood calls and odor complaints, this XPOWER air mover means you don't have to haul a separate ozone machine. It works best in rooms you can close off and leave empty during treatment. Never run ozone with people or pets present, and use the timer to schedule treatment cycles. Both models give you the same brushless airflow, so your choice comes down to ozone size and power draw rather than drying performance.
Specifications
Specifications
-
Number of SpeedsVariable
-
TypeFloor
-
CertificationsETL
-
ColorBlack
-
ControlsManual
-
Indoor/OutdoorIndoor
-
Maximum Cubic Feet per Minute (CFM) (CFM)1450.0
-
Maximum Amperage (Amps)1.51.2
-
Maximum Wattage (W)145138
-
Power Cord Length (ft.)6
-
Power SupplyPlug-In
-
Voltage (V)110-120
-
Depth (in.)15.4
-
Height (in.)17.2
-
Weight (lbs.)12.6
-
Width (in.)8.8
-
Additional FeaturesAdjustable Head, GFCI Safety Plug, Meets OSHA Standards, Applicable for Indoor Growing
-
Manufacturer's Warranty1-Year Warranty
