S&P TRCeN500(V) 488 CFM Energy Recovery Ventilator w/ EC Motor

SKU: sp15661 | Model: TRCeN500V-230

$4,489.00

FREE shipping on orders over $45!

In Stock Usually ships in 30 business days.

Option

Product variants

Have a question or need a quote? Ask Our Experts

Live Chat | 1 (800) 934-9194 | Request Callback | Email

Manufacturer's Warranty

10-Year Core Warranty, 2-Year Unit Warranty

What's In The Box?

S&P TRCeN500 488 CFM Commercial Energy Recovery Ventilator
MERV 8 - 14 x 20 x 2 (2)
Installation and Operating Manual

Info & Guides

Description

The S&P TRCeN500 Commercial Energy Recovery Ventilator provides fresh air exchanges to improve the indoor air quality of commercial spaces in any climate.

This commercial ERV uses two 170 W direct-drive electronically commutated motorized impeller packages and an AHRI 1060 certified energy recovery core to deliver an airflow of 166 to 488 cubic feet per meter (CFM) with high efficiency and fan efficacy.

The fully insulated 20 gauge galvanized steel cabinet features access doors for quick and easy access to the unit’s blowers, core, and filter. This model uses two MERV 8 filters (14 x 20 x 2 inches) to remove impurities from outside air and room air.

Airflow Options

Customers can choose between the TRCeN500 or the TRCeN500V for different airflow and duct connection configurations that will fit various spaces and applications.

TRCeN500: Return and outside airflows enter on the same side of the unit.
TRCeN500V: Return and outside airflows enter on opposite sides of the unit.

Power Specifications

The TRCeN500 and TRCeN500V feature a 208-230V single-phase system with 1.16 FLA (per motor), 2.6 minimum circuit amps, and 15 amps MOPD. This ERV also has a non-fused disconnect and a 24 VAC transformer relay package to power and connect optional accessory controllers.

High Efficiency Cores

The TRCeN500 uses one L85-G5 core, which crossflows indoor and outdoor airflows using S&P’s “air-to-air” technology to provide the highest energy recovery possible while keeping airflows separated.

The resin recovery cores have a unique moisture transfer capability that eliminates moisture and frost build-up down to -10 degrees F and 40 percent RH, resulting in higher efficiency and more reliable operation. Additionally, this model does not require a condensate pan or draining solution.

Easy Installation

The preferred mounting location is sitting on a concrete floor using the factory-provided leveling legs, or attached to a structural support or ceiling . This ERV connects to new or existing ducting with 12 x 12-inch square receiving flanges.

Differential pressure ports in the core will allow HVAC professionals to take pressure measurements and monitor the system’s operation.

Certifications

AHRI Certified
Ecowatt Certified
cETLus Listed
Buy American (2009) and Build America, Buy America (BABA) as part of IIJA (2022).

Sylvane’s Expert Take

Use the S&P TRCeN500 to provide efficient air exchanges for commercial spaces. HVAC professionals will love this unit's easy installation and maintenance, powerful airflow, and effective energy recovery cores, which improve indoor air quality as required by modern building codes.

Twin Motors: Airflow from this ERV is driven by two single-phase 170 W direct-drive EC motorized impellers with independent blower control.
Filters: This ERV's outdoor and room airflows are filtered by MERV 8 filters, so room air stays clean and stale air impurities are removed. An optional MERV 13 filter can be found here.

Specifications

Key Specifications

Minimum Cubic Feet per Minute (CFM) (CFM)

166.0
Mounting Type

Floor, Ceiling
Port Location

Side
Type

ERV-Air Supply Fan

General

Application

Commercial/Industrial
California Residents

⚠ WARNING: This product can expose you to chemicals including formaldehyde, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.www.p65warnings.ca.gov.
Certifications

AHRI, cETLus
Color

Gray
Controls

Electronic
Maximum Cubic Feet per Minute (CFM) (CFM)

488.0