XPOWER P-800H 3/4 HP 3200 CFM Centrifugal Air Mover

SKU: xp11797 | Model: P-800H-Blue

$380⁰⁰

Option

w/ Telescopic Handle Standard

Have a question or need a quote? Ask Our Experts

Live Chat | 1 (800) 934-9194 | Email

Manufacturer's Warranty

1-Year Warranty

What's In The Box?

XPOWERP-800H Air Mover
Owner's Manual

Info & Guides

Description

Water damage rarely stays on the floor. The XPOWER P-800H 3/4 HP 3200 CFM Centrifugal Air Mover sends air from a low-profile outlet straight at carpet and baseboards, then turns to dry wall cavities and ceilings as the job moves up. Offered in Standard and Telescopic Handle configurations, it lets you decide how you would rather move it between rooms.

Power draw matters when you set up a full drying line on one job site. This air mover runs on 110-120 volt power at a modest 7.5 amps, so you can spread more fans across the space before you run out of circuit capacity. It also carries Xactimate code WTRDRY, which makes it easier to document equipment on your restoration estimates.

Key Features and Benefits of the XPOWER P-800H 3/4 HP 3200 CFM Centrifugal Air Mover

3200 CFM Airflow: A 3/4-HP induction motor forces air hard across saturated surfaces so they dry faster.
Efficient Power Draw: The motor uses 863 watts at 7.5 amps, which lets you run more air movers on the same job without overloading circuits.
3 Fan Speeds: A manual knob on the front sets 3 speeds from 1,000 RPM up to 1,500 RPM, so you can match airflow to how wet the area is.
Adjustable Drying Angles: Lay it flat at 0 degrees for carpet or stand it at 90 degrees for walls, and use the kickstand for a 20-degree tilt on uneven floors.
Stacks 4 High: You can stack up to 4 air movers on top of each other, which saves floor space in your truck and storage area.
Dual Thermal Protection: Dual thermal overload protection keeps the motor within a healthy temperature range, which helps extend motor life during long drying runs.
20-Foot Cord: That length lets you place the air mover well away from the outlet, and it wraps up neatly once the job is done.
Compact Footprint: It measures 15.9 x 18.7 x 18.7-Inches (L x W x H), a size that is simpler to move and store between jobs.
ETL and cETLus: Its ETL and cETLus listings confirm the air mover meets US and Canadian electrical safety standards for professional job sites.

Standard vs Telescopic Handle: Choosing Your Setup

You can choose the P-800H in a Standard configuration or with a telescopic handle, depending on how you move equipment between losses.

Standard: The Standard model (xp17109) weighs 23 pounds and relies on its built-in carry handle, so you can lift it up stairs and into basements with less effort.
With Telescopic Handle: This version (xp11797) comes with a collapsible telescopic handle, so you can pull the air mover across large job sites instead of carrying it, and it weighs 27.6 pounds.

Sylvane's Expert Take

If you run water damage restoration jobs where moisture has wicked up drywall, the P-800H handles that well. The 90-degree position matters most because it turns the air mover into a wall dryer without needing extra stands. Go with the Standard model if you haul gear up stairs often, and pick the telescopic handle version for large single-level losses. Whichever handle you pick, you get the same 3200-CFM motor, so your drying results stay the same.

Specifications

Key Specifications

Number of Speeds

3
Type

Centrifugal Air Mover

General

Certifications

ETL, cETLus
Color

Blue
Controls

Manual
Drying Application

Carpet, Floor/Baseboard, Wall, Ceiling, Construction/Utility
Maximum Cubic Feet per Minute (CFM) (CFM)

3200.0
XACTIMATE Code

WTRDRY
California Residents

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.