Anden A321V1 High-Capacity Dehumidifier

SKU: an19284 | Model: 4046250

$3,699⁰⁰

Power

208-240 277

Have a question or need a quote? Ask Our Experts

Live Chat | 1 (800) 934-9194 | Email

Manufacturer's Warranty

1-Year Complete Warranty, 2-Year Additional Parts Warranty

What's In The Box?

Anden A321V1 High-Capacity Dehumidifier
MERV 13 Air Filter
Owner's Manual, Guides, and Other Documents

Info & Guides

Tight equipment rooms and open warehouse bays call for different mounting approaches, and the Anden A321 Series High-Capacity Dehumidifier handles them easily. You can hang it from the ceiling using built-in threaded inserts. Leveling feet support floor placement, or you can locate it in an adjacent room and duct air in and out.

Thriving in ambient conditions from 56 to 95 degrees F, this High-Capacity Dehumidifier is ideal for use in unheated storage or warm production areas, like those found in indoor agricultural production, self-storage facilities, factories, and other industrial or commercial industries.

Key Features and Benefits of the Anden A321 Series High-Capacity Dehumidifier

High-Capacity Drying: Pulls up to 321 pints of moisture per day (320 pints on model A321V1) at 80 degrees Fahrenheit and 60 percent relative humidity.
Strong Airflow: Fans move 775 CFM at 0.0 inches water gauge static pressure, circulating dry air so moisture does not pocket in far corners.
MERV 13 Filtration: A self-sealing 20 x 22 x 2 inch MERV 13 filter shields internal components and pulls out for fast replacement.
Digital Control: The onboard electronic panel combines humidistat setpoint control with self-diagnostics, so you can read faults on the machine display.
Remote Wiring: A low-voltage terminal block ties the dehumidifier to an external remote, letting you manage humidity from outside the space.
Gravity Drainage: A 3/4 inch FNPT drain connection (P-trap required) carries condensate away continuously, with no internal condensate pump to maintain.
Automatic Defrost: Automatic defrost clears frost from the evaporator coil so the compressor keeps drying in cool ambient conditions.
Auto-Restart: Auto-restart returns the dehumidifier to its previous settings after a power interruption, protecting stored goods during overnight outages.
Refrigerant: The sealed system uses R-454B refrigerant with a 62-ounce charge, giving you the refrigerant details needed for service reference.
ETL Listed: ETL listing confirms the dehumidifier has been tested to North American electrical safety standards.

Choose the Right Voltage for Your Building's Service

Because the cabinet, airflow, and controls are shared, choose based on the electrical service, either 208-240 volt or 277 volt.

208-240 Volt: Model A321V1 draws 1,960 watts and up to 9.7 amps on single-phase service, helping you confirm electrical capacity before installation. Its NEMA 6-15P plug supports standard commercial connection, while 21,100 BTU per hour of total output supports high-capacity moisture removal.
277 Volt: Model A321V3 draws 1,930 watts and 7.2 amps on single-phase service, helping you confirm electrical capacity before installation. Its NEMA L7-15P plug supports standard commercial connection, while 21,000 BTU per hour of total output supports high-capacity moisture removal.

Sylvane's Expert Take

Facility managers with serious moisture control issues will get the most from the Anden A321 Series, particularly in spaces where the ceilings are high enough to suspend equipment clear of traffic. Select the model that matches your building's electrical service: 208-240 volt or 277 volt. Plan on a qualified HVAC or electrical contractor for wiring and service, but either version gives you industrial moisture control for large commercial spaces.