iLiving ILG8F20 20 In. 3 Speed Heavy Duty Floor & Wall Mount Fan
iLiving ILG8F20 20 In. 3 Speed Heavy Duty Floor & Wall Mount Fan is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
Info & Guides
Info & Guides
iLiving ILG8F20 20 In. 3 Speed Heavy Duty Floor & Wall Mount Fan is backordered and will ship as soon as it is back in stock.
The iLiving ILG8F20 20 In. 3 Speed Heavy Duty Floor & Wall Mount Fan pushes up to 5,750 CFM of airflow to keep large indoor spaces cool and well-ventilated. Built for garages, warehouses, workshops, and loading areas, this 20-inch industrial fan mounts to your wall or sits directly on the floor, giving you flexible placement wherever you need high-volume air circulation.
Key Features and Benefits of the iLiving ILG8F20 20 In. 3 Speed Heavy Duty Floor & Wall Mount Fan
- High-Volume Airflow: The 20-inch blade delivers up to 5,750 CFM with a 120W motor, moving enough air to keep you comfortable in large garages, workshops, and warehouse spaces.
- Dual Mounting: At just 24.0 inches wide and 12.9 pounds, this fan fits and mounts easily on your wall or sits on the floor for flexible placement.
- Speed Settings: The fan offers 3 manual speed settings, giving you direct control over airflow intensity for different tasks and conditions.
- Thermal Protection: Built-in thermal cutoff protection automatically shuts the motor down if it overheats, reducing the risk of damage during extended use.
- Safety Certified: UL and cULus certification confirms the fan meets rigorous electrical safety standards for your peace of mind.
- Lightweight Frame: At 12.9 pounds with an all-metal rust-resistant frame, the fan is light enough to reposition or wall-mount without heavy-duty hardware.
- Long Power Cord: A 5.6-foot power cord gives you extra reach so you can plug in without needing an extension cord in most setups.
- Standard Power: Rated at 120 volts and drawing just 1.36 amps at full speed, the fan runs on a standard household outlet without tripping your breaker.
Choosing Between Floor and Wall Placement
Your workspace layout determines the best mounting option for this fan. Floor placement works well in open areas where you can set the fan down, plug it in, and angle the adjustable head toward your work zone. Wall mounting frees up valuable floor space in tighter environments like small garages or crowded work areas, and at 12.9 pounds, either option is manageable for a single person. This fan is rated for indoor use only, and at 64 dB on its highest setting, the noise level stays low enough that it won't drown out conversation in a shared workspace.
Sylvane's Expert Take
This iLiving 20 Inch Heavy Duty Floor & Wall Mount Fan is a solid pick if you run a small workshop, garage, or commercial space that needs consistent, high-volume air movement without overcomplicating your setup. Its 5,750 CFM output handles the kind of square footage that smaller desk or pedestal fans simply cannot reach, and the wall-mount option makes it practical for spaces where every square foot of floor counts. With its dual-mount flexibility, you get a fan that adapts to your space rather than locking you into a single setup.
-
Number of Speeds3
-
TypeFloor, Wall-Mountable
-
CertificationscULus, UL
-
ColorBlack
-
ControlsManual
-
Indoor/OutdoorIndoor
-
Maximum Cubic Feet per Minute (CFM) (CFM)5750.0
-
Maximum Noise Level (dB)64
-
California Residents⚠ WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov.
-
Maximum Amperage (Amps)1.36
-
Maximum Wattage (W)120.0
-
Power Cord Length (ft.)5.6
-
Power SupplyElectric
-
Voltage (V)110-120
-
Depth (in.)10.6
-
Fan Diameter (in.)20.0
-
Height (in.)22.4
-
Weight (lbs.)12.9
-
Width (in.)24.0
-
Additional FeaturesAdjustable Head, Wall-Mountable, Thermal Cutoff Protection
-
Manufacturer's Warranty1-Year Component Limited Warranty







