PhotonTek X 465W Pro LED Grow Light is backordered and will ship as soon as it is back in stock.
Description
Description
Most grow lights lock you into a single fixed footprint, which becomes a problem the moment your tent size or plant count changes. The PhotonTek X 465W Pro LED Grow Light solves that with click-magnet bars that snap together quickly, letting you run anywhere from 1 to 5 bars depending on your space and the light intensity you want.
Full-spectrum output spreads light evenly close to the canopy, so one fixture can carry your plants from vegetative growth through flowering. PhotonTek rates this LED system to need 30 to 40 percent less HVAC capacity than a similar-wattage HPS light, which means less effort and equipment spent keeping your grow room cool.
Key Features and Benefits of the PhotonTek X 465W Pro LED Grow Light
- Modular Bar Design: A set of 5 click-magnet LED bars rated at 100 watts each lets you run 1 to 5 bars to match your space.
- High PPF Output: Total output of 1,256 micromoles per second gives your canopy dense, usable light for strong growth in both vegetative and flowering stages.
- System Efficacy: An efficacy of 2.7 micromoles per joule turns more of each watt into plant-usable light, helping you keep electric bills in check.
- Built-In Dimming: The included driver has a 0-10V dimmer with Off, 25, 50, 75, and 100 percent settings, so you can tune intensity by growth stage.
- IP65 Rating: An IP65 waterproof rating protects the fixture from moisture and water spray, a real concern in humid tents and during watering.
- Long LED Lifetime: LEDs rated for 60,000 hours of operation let you run many grow cycles before light life becomes a concern.
- Wide Light Distribution: A 120-degree distribution angle spreads light across the full footprint, giving your plants more even coverage from center to edge.
- Twist Lock Driver: The 465-watt driver includes Twist Lock capability, giving you a lockable power connection option.
- Dual Voltage Support: Rated for 110-120 volts or 277 volts with a maximum draw of 2.61 amps, the light suits household circuits and commercial setups.
- CSA Certified: CSA certification confirms the fixture meets recognized electrical safety standards, giving you confidence running it for long daily light cycles.
- Slim Fixture Profile: Measuring 39.29 x 35.43 x 2.92-Inches (L x W x H) and weighing 24.25 pounds, the low-profile frame preserves headspace in your tent.
Matching Bar Count to Your 3 x 3 or 4 x 4 Space
PhotonTek rates this fixture from 3 x 3 feet for vegetative growth up to 4 x 4 feet for flowering. In a 3 x 3 tent during veg, you can remove 1 or 2 bars and dim the rest to avoid overpowering young plants. Once plants move into flower, running all 5 bars at full intensity gives a 4 x 4 canopy the light density it needs. PhotonTek expects crop yields to increase 30 to 60 percent with this light, and stepping up bar count as your canopy fills is where that gain shows.
Sylvane's Expert Take
If you're a home grower working in a 3 x 3 or 4 x 4 tent, this light lets you change coverage without swapping fixtures. Its lower HVAC requirement matters most in enclosed tents where heat builds up.
The click-magnet bars are the standout: you can resize coverage between grows in minutes. Pay closest attention to the high PPF output and the 0-10V dimmer, which let you push hard in flower and ease off in veg. For an adjustable full-spectrum setup, start here.
Specifications
Specifications
-
Heat Output (BTUs)2115
-
Total Output (PPF)1256
-
CertificationsCSA
-
Dimming Control Type0-10V
-
Flowering Footprint (ft.)4x4
-
Lighting TypeLED
-
System PPF Efficacy (μmol/joule)2.7
-
Veg Footprint (ft.)3 x 3 - 4 x 4
-
Maximum Amperage (Amps)2.61
-
Plug Face Type5-15P
-
Voltage (V)110-120, 277
-
Watts (W)465
-
Depth (in.)39.29
-
Height (in.)2.92
-
Weight (lbs.)24.25
-
Width (in.)35.43
-
Additional FeaturesFull Spectrum, Dimmable, Applicable for Indoor Growing
-
Manufacturer's Warranty5-Year Warranty

