Tornado Brute Force 2000 High-Speed Glazer w/ Dust Control Burnisher
Tornado Brute Force 2000 High-Speed Glazer w/ Dust Control Burnisher is backordered and will ship as soon as it is back in stock.
Manufacturer's Warranty
Manufacturer's Warranty
What's In The Box?
What's In The Box?
Info & Guides
Info & Guides
Tornado Brute Force 2000 High-Speed Glazer w/ Dust Control Burnisher
Tornado Brute Force 2000 High-Speed Glazer w/ Dust Control Burnisher is backordered and will ship as soon as it is back in stock.
The Tornado Brute Force 2000 High-Speed Glazer uses precision-balanced weight distribution to hold the pad flat against the floor at 2,000 RPM, so you get an even shine down the length of a corridor rather than patchy swirl marks.
Burnishing is one of the more physical jobs on a commercial route, and the Brute Force 2000 is built around that reality. Its floating handle carries the head with no flutter or pull, so you can track a straight line past classroom doors and correct around fixtures without fighting the machine as you walk behind it.
Key Features and Benefits of the Tornado Brute Force 2000 High-Speed Glazer w/ Dust Control Burnisher
- Pad Speed: The 20-inch pad driver turns at 2,000 RPM, so you reach a wet-look gloss in fewer passes down each aisle.
- Dust Control: The Tornado Brute Force 2000 features dust control that meets LEED and CIMS-GB standards, so you can burnish while a building stays occupied.
- Motor Power: A 1.5-horsepower motor supports effective burnishing across commercial floor-care routes.
- Enclosed Motor: The patented fully-enclosed motor runs cooler for longer service life; it opens quickly when maintenance is needed.
- Molded Housing: The one-piece rotationally-molded construction absorbs torque and vibration, keeping the machine steady in your hands through long runs.
- Pad Hardware: A pad holder and pad retainer are included, giving you the hardware needed for burnishing.
- Standard Voltage: This model is wired for 110-120 volt power; it plugs into the outlets already in your hallways with no added electrical work.
Sizing the Brute Force 2000 to Your Building
The 75-foot power cord matters for extended cleaning routines, since a single outlet can anchor an entire hallway run before you unplug and reposition. At 89 pounds, this is a wheeled walk-behind machine you steer rather than wrestle. The 23 x 44.5 x 35.5 inch dimensions allow you to store it easily between cleaning and maneuvering it between floors.
Sylvane's Expert Take
You'll benefit most from the Tornado Brute Force 2000 if it's used to maintain finished hard floors in schools, hospitals, or retail spaces, where you need a walk-behind burnisher for sustained commercial floor care. Before selecting this device, confirm your floor finish is formulated for high-speed burnishing. The enclosed motor's cooling design and quick maintenance access matter when you need to keep equipment in service. For demanding floor-care schedules, this glazer is a good choice.
-
PropulsionWalk-behind
-
TypeBurnisher
-
ApplicationCommercial/Industrial
-
Brush/Pad Speed (RPM)2000
-
Cleaning Path (in.)20.0
-
ColorBlack, Yellow
-
Pad Driver Diameter (inches)20.0
-
California Residents⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
-
Horsepower (hp)1.5
-
Horsepower (hp)1.5
-
Power Cord Length (ft.)75
-
Power SupplyElectric
-
Voltage (V)110-120
-
Depth (in.)35.5
-
Height (in.)44.5
-
Weight (lbs.)89
-
Width (in.)23.0
-
Additional FeaturesWheeled
-
Manufacturer's Warranty10-Year Water Tank and Roto-Molded Body Limited Warranty; 2-Year Parts and Labor Limited Warranty
