FREE Shipping Over $45*

0% APR 1yr financing with Affirm*
1 12

XPOWER X-39AR 1/4 HP 2100 CFM Professional Sealed Motor Axial Fan

SKU: xp14641  |  Model: X-39AR-Red
$24600
Option

Have a question or need a quote? Ask Our Experts

Live Chat | 1 (800) 934-9194 | Email

Manufacturer's Warranty

1-Year Limited Warranty

What's In The Box?
  • XPOWER X-39AR Professional Sealed Motor Axial Fan
  • Stand with Hardware
  • Owner's Manual

Description

Wet carpet and soaked drywall dry only as fast as the air moving across them. The XPOWER X-39AR 1/4 HP 2100 CFM Professional Sealed Motor Axial Fan sits in a rack that turns a full 360 degrees, so you can point the stream up at a ceiling or down at the floor in seconds and keep moisture moving off every surface.

Restoration is only part of the job list. Because the motor is sealed against moisture, mold spores, sawdust, and metal particulates, this air mover keeps running in factories and assembly areas, and it also works for drying paint or adding air circulation to a stuffy workspace. It meets OSHA work safety standards, so you can bring it onto regulated job sites.

Key Features and Benefits of the XPOWER X-39AR 1/4 HP 2100 CFM Professional Sealed Motor Axial Fan

  • High-Volume Airflow: Moves up to 2,100 CFM and throws air as far as 60 feet, so you can dry a large room from a single position.
  • Sealed Brushless Motor: The sealed 1/4-horsepower brushless induction motor keeps out moisture and airborne debris, so the fan keeps running in flooded basements and dusty factories.
  • Variable Speed Dial: A manual variable speed dial lets you turn the airflow up for soaked carpet or down for gentle circulation while paint dries.
  • Daisy-Chain Outlets: Built-in GFCI outlets let you daisy chain up to 2 more fans, drawing just 1.6 amps at 184 watts.
  • Rotating Rack Stand: The included 360-degree rack holds the 14-inch, 5-blade grille at any angle, so you can bounce air off walls or aim it straight up.
  • ETL Listed: ETL listing and compliance with OSHA work safety standards give you a safety-certified air mover for professional restoration and industrial work.
  • ABS Housing: The tough ABS exterior handles rough treatment and extreme temperatures, so the fan holds up through repeated hauling between job sites.
  • Stackable Design: You can stack up to 5 fans high, which saves floor space in closets or warehouses between jobs.
  • Portable Build: It weighs 16.5 pounds and measures 18.6 x 19.2 x 9.4-Inches (L x W x H), so you can carry it from room to room.
  • Long Power Cord: A 20-foot cord with wrap-around storage reaches distant outlets and stays tidy when you move the fan to the next room.
  • Color Options: You can choose red or blue ABS housing to tell your fans apart on busy restoration jobs.

Positioning the X-39AR for Each Drying Task

For wall cavities and wet carpet, set the fan low and horizontal so the stream bounces off the wall and reaches corners you can't target directly. Tilt the head upward to dry a ceiling, or point it down so the air spreads across a soaked floor. The fan runs on standard 110-120 volt plug-in power, so it plugs into ordinary wall outlets. If you bill restoration work through Xactimate, this air mover falls under the WTRDRY+ code.

Sylvane's Expert Take

If you run water damage restoration jobs or keep air moving on a dusty factory floor, the X-39AR belongs in your equipment lineup. It works best close to wet carpet and drywall, where the adjustable head lets you put the airflow right where it's needed.

The sealed brushless motor matters most, because it keeps moisture and particulates out of the drive. The red and blue versions have identical specs, so pick whichever color helps you keep track of your fans.

Specifications

    Key Specifications

    • Number of Speeds
      Variable
    • Type
      Axial Air Mover

    General

    • Certifications
      ETL
    • Color
      Red: Red
      Blue: Blue
    • Controls
      Manual
    • Indoor/Outdoor
      Indoor
    • Maximum Cubic Feet per Minute (CFM) (CFM)
      2100.0
    • XACTIMATE Code
      WTRDRY+

    Power

    • Maximum Amperage (Amps)
      1.6
    • Maximum Wattage (W)
      184
    • Power Cord Length (ft.)
      20
    • Power Supply
      Plug-In
    • Voltage (V)
      110-120

    Dimensions

    • Depth (in.)
      18.6
    • Height (in.)
      9.4
    • Weight (lbs.)
      16.5
    • Width (in.)
      19.2

    Additional Features

    • Additional Features
      Adjustable Head, GFCI Safety Plug

    Warranty

    • Manufacturer's Warranty
      1-Year Limited Warranty

Customer Reviews