Waking up congested, getting headaches that fade when you leave the house, or noticing a musty smell in the basement? These are common signs of poor indoor air, but since most pollutants are invisible, it's hard to know the cause without an indoor air quality test.
Here's how to test home air quality. Use an air quality monitor for everyday pollutants, a home air quality testing kit to confirm problems like mold, and a separate test for radon.
Once you know what's in your air, the fix is usually simple; just remove the source, improve ventilation, and use the right equipment, like an air purifier for dust and pollen or a dehumidifier for moisture and mold.
-
Signs You Need an Indoor Air Quality Test
- Types of Indoor Air Quality Tests
- DIY Air Quality Test vs. Professional Testing
- How to Test Home Air Quality in 7 Steps
- How to Read Air Quality Test Results
- How to Improve Your Indoor Air Quality After Testing
-
Home Air Quality Testing Frequently Asked Questions
Signs You Need an Indoor Air Quality Test

Poor indoor air is rarely obvious, but it matters more than you might think. The U.S. Environmental Protection Agency (EPA) notes that Americans spend about 90 percent of their time indoors, where some pollutants are often 2 to 5 times more concentrated than outdoors. The EPA lists eye, nose, and throat irritation, headaches, dizziness, and fatigue among the short-term effects, and some pollutants can trigger or worsen asthma.
One of the more obvious signs of poor air quality is based on your symptoms' timing. If your symptoms ease when you leave home and return when you come back, that's a sign something inside your home may be the cause. If symptoms continue after you've improved your home's air, talk with your doctor or an allergist.
Use this table to match what you're noticing with the most likely culprit and find the right test to confirm it:
Carbon Monoxide Safety First
Carbon monoxide (CO) symptoms, including headache, dizziness, weakness, nausea, and confusion, are often mistaken for the flu. The Centers for Disease Control and Prevention (CDC) reports that more than 400 Americans die from unintentional CO poisoning not linked to fires each year. If you suspect CO, get everyone outside right away and call 911. Don't test for it; use an alarm instead.
Common sources of carbon monoxide in a home include:
- A running car in a closed attached garage
- A gas or wood-burning fireplace, or a clogged chimney
- A cracked or loose furnace heat exchanger
- A corroded or disconnected water heater vent pipe
- An improperly installed kitchen range or vent
- Portable kerosene or gas heaters
- A grill or generator used indoors or in the garage
Types of Indoor Air Quality Tests
Air Quality Monitors
An air quality monitor tracks your air continuously and shows real-time readings on a display or app. Sensors vary by model: the AprilAire Wi-Fi Healthy Air Monitor tracks PM2.5, VOCs, CO2, and humidity; the Airthings Wave Plus adds radon but excludes PM2.5; and the Airthings View Plus tracks all of them. Keep in mind that VOC sensors report a combined total rather than specific chemicals, so they aren’t the best for finding the source of the problem, just confirming the problem.
Laser Particle Counters
A laser particle counter like the Dylos PRO Laser Particle Counter counts small particles, like smoke and fine dust, and large particles, like pollen, dander, and dust. It's also an easy way to check whether your air purifier is working by taking a reading, running the purifier for an hour, and comparing levels.
Home Air Quality Testing Kits
A home air quality testing kit lets you collect a sample, mail it to an accredited lab, and receive a report that identifies exactly what's present. These can be helpful for documentation purposes. Sylvane carries mold test kits, a VOC test kit, and an asbestos test kit for older homes.
Radon Tests
Radon is a colorless, odorless gas from the soil. The EPA estimates it causes about 21,000 lung cancer deaths a year. Short-term tests run 2 to 90 days, while long-term radon detectors like the Accustar Alpha Track Radon Test Kit and digital detectors like the Airthings Corentium Home 2 better reflect your year-round average.
Hygrometers
A hygrometer measures humidity and is one of the least expensive ways to start testing. Since humidity drives mold and dust mites, it's a smart first step if you suspect a moisture problem. The Acu-Rite Remote Thermometer/Hygrometer includes a remote sensor you can place in a basement or crawl space. To catch leaks before they lead to mold, see our Leak Detectors Buying Guide and Moisture Meters Buying Guide.
Quick Comparison
DIY Air Quality Test vs. Professional Testing
For most homeowners, a DIY air quality test is the right place to start. It's affordable, you can do it on your own schedule, and it tells you whether a problem exists. A professional makes sense when the problem is large, when the fix requires specialized work, or when you need official documentation.
A DIY air quality test is enough when you want to:
- Track Everyday Air Quality: See how cooking, cleaning, and ventilation affect your air.
- Find the Source of Allergy Symptoms: Measure particles and humidity in the rooms where you feel worst.
- Screen for Radon: Do-it-yourself radon kits and detectors are an accepted first step followed by professional help.
- Confirm a Suspected Problem: Use a lab-analyzed kit to check for mold or VOCs.
Call a professional when:
- Mold Covers a Large Area: The EPA recommends professional help if mold growth covers more than about 10 square feet, or if the water damage involved sewage or other contaminated water.
- Radon Is High: If your results are 4 pCi/L or higher, a certified radon mitigation contractor can install a system to reduce it.
- You're Planning a Renovation in an Older Home: Asbestos and lead paint need careful handling before you sand, cut, or demolish anything.
- You Need Documentation: A home sale, an insurance claim, or a dispute with a landlord may call for a certified inspector's report.
DIY testing is a good start when you suspect an air quality problem and want to confirm elevated pollutant levels, but professional testing identifies the problem-causing pollutant, where it is, and the next steps to remove the pollutant. But in cases where you can see or smell mold, the EPA says testing usually isn't necessary. You should clean it up and fix the moisture problem either way. There are also no federal limits for mold, so a test can confirm that mold is present but can't tell you whether a level is "safe."
How to Test Home Air Quality in 7 Steps
You don't need to test for everything at once. Follow these steps to run a DIY air quality test that moves from the most urgent to the most specific:
- Make Sure You Have CO Alarms: Before anything else, confirm there's a working CO alarm near every sleeping area.
- Write Down Your Symptoms: Note what you feel, which rooms are worst, and what time of day symptoms flare up. Use the table above to narrow down the likely culprits.
- Get a Baseline: Place an air quality monitor or particle counter in your main living area or bedroom. Let it run for at least 1 week, since many monitors need several days to calibrate their VOC and CO2 sensors.
- Check Humidity Room by Room: Use a hygrometer in the basement, bathrooms, and bedrooms. Readings above 60 percent are a warning sign for mold and dust mites.
- Test Problem Areas: Use a home air quality testing kit wherever you notice musty smells, past leaks, or chemical odors. Follow the kit's instructions exactly, especially about closing windows and turning off fans during sampling.
- Test for Radon: Place a radon kit or detector on the lowest lived-in level of your home, with windows and exterior doors kept closed except for normal coming and going.
- Compare Your Results: Check your numbers against the reference levels in the next section, make changes, and then test again to confirm they worked.
How to Read Air Quality Test Results

Lab test results are usually mailed or emailed back, showing the targeted pollutant levels from your test and the standard safe threshold for those pollutants, for side-by-side comparisons. Some lab-tested results may provide more in-depth analysis and explanation to help you decide the best next course of action.
Most monitors use color-coded ratings, but each brand sets its own thresholds. The following table is a good general target range for:
- Relative Humidity: The ideal range is between 30 and 50 percent humidity. If it’s above 60 percent for an extended period, it’s time to get a dehumidifier.
- PM2.5: Good air quality will have 0 to 9 micrograms per cubic meter (µg/m³) of fine particulate matter. Levels at or above 35.4 µg/m³ are considered unhealthy for Sensitive groups and might be a sign to add a HEPA air purifier to your space.
- CO2: Levels under 1,000 ppm are considered safe, but if it is consistently above 1,000 ppm, look into upgrading your ventilation.
- Radon: The lower the level is, the better, but it’s hard to maintain levels below 2 pCi/L. If radon levels are 4 pCi/L or higher, it’s time to call a professional to vent the radon outside of your home.
- Carbon Monoxide: No steady levels of carbon monoxide are safe, but temporary spikes are normal. There is no need to worry until the alarm goes off. If the alarm is going off, vacate the building and call 911 or local emergency services.
A few tips for reading your numbers:
- Look for Patterns: PM2.5 jumps when you cook or light a candle, and CO2 rises overnight in a closed bedroom. Temporary spikes are not something to be concerned about, but pay attention to readings that stay high.
- Compare Rooms: If one room reads much worse than the rest, the source is likely in or near that room.
- Treat VOC Readings as a Signal: A rising total VOC reading tells you something changed, but not which chemical. Use a VOC test kit if you need to identify it.
- Read Lab Reports Carefully: Mold reports often compare indoor spore counts to an outdoor sample. When indoor counts are much higher than outdoor counts, or specific mold spores are found indoors but not outdoors, it’s an indoor source.
How to Improve Your Indoor Air Quality After Testing

The EPA outlines three strategies for cleaner indoor air, in this order:
- Source Control: Remove or reduce what's causing the problem. It’s usually the most effective way to improve indoor air quality.
- Ventilation: Bring in more outdoor air with open windows, exhaust fans, or mechanical ventilation, especially while you cook, clean, or paint.
- Air Cleaning: Use air purifiers and better HVAC filters to capture what's left.
Here's how to put those strategies to work based on what the test shows:
- High Particles: Use a True HEPA air purifier and upgrade your HVAC filter (MERV ratings explained)
- High Humidity: Fix leaks, dry wet areas within 24 to 48 hours, and use a dehumidifier
- Low Humidity: Use a humidifier
- High VOCs: Remove the source and ventilate. A purifier with a substantial activated carbon filter may help, but the EPA notes most air cleaners aren't designed to remove gases
- High CO2: Open windows or run exhaust fans; a purifier won't lower CO2
- High Radon: Install a mitigation system (see DIY Air Quality Test vs. Professional Testing above)
Your Next Steps
Not sure where to begin? Start with the situation that sounds most like yours:
- You Have Allergy Symptoms With No Obvious Cause: Start with a laser particle counter or an air quality monitor that tracks PM2.5, and check humidity with a hygrometer. If either reading stays high, add an air purifier or a dehumidifier.
- You Notice a Musty Smell or Had Water Damage: Check humidity first, then use a mold test kit to confirm hidden mold. Fix the moisture source before anything else.
- You Recently Renovated or Bought New Furniture: Use a monitor with a VOC sensor, ventilate well, and consider a VOC test kit if odors linger.
- You've Never Tested for Radon: Test now. It's the only way to know your level, and the EPA recommends testing every home. Shop radon detectors and test kits.
- You Want the Big Picture: Choose an all-in-one monitor, like the Airthings View Plus, that tracks PM2.5, VOCs, CO2, humidity, and radon so you can catch problems early.
- No Matter What: Make sure you have a working CO alarm near every sleeping area.
Home Air Quality Testing Frequently Asked Questions
How do I test the air quality in my home?
Make sure you have working CO alarms, then use a monitor or particle counter to get a baseline and test for radon. If you suspect a specific problem like mold or VOCs, confirm it with a lab-analyzed home air quality testing kit.
Are home air quality testing kits accurate?
Lab-analyzed kits are reliable when you follow the sampling instructions closely, because the analysis is done by an accredited laboratory. Consumer monitors are best for tracking trends and changes. Their readings are useful guides, but they aren't as precise as professional lab equipment.
How much does an indoor air quality test cost?
DIY options range widely. Basic mold test kits start around $15, radon test kits typically cost $35 to $60, and air quality monitors and particle counters generally range from about $160 to $330. Lab kits that identify specific VOCs can cost several hundred dollars. Professional inspections usually cost more than DIY testing.
Can I do a DIY air quality test without a kit?
You can look for warning signs like condensation on windows, musty odors, visible mold, and dust that returns quickly. These clues are helpful, but they can't measure invisible pollutants like radon, carbon monoxide, or fine particles. A hygrometer is an inexpensive way to get your first real numbers.
How often should I test my home's air quality?
A continuous monitor tests your air all the time. Otherwise, test whenever symptoms change, after water damage, and after a renovation or new furniture. For radon, the EPA suggests retesting if you start using a lower level of your home, and retesting every two years if you have a radon reduction system.
Can my phone test indoor air quality?
No. Weather and air quality apps report outdoor conditions, not the air inside your home. To measure indoor air, you need a monitor, a test kit, or a detector.
Will an air purifier fix poor indoor air quality?
A True HEPA air purifier can significantly reduce airborne particles like dust, pollen, and pet dander. It won't fix high humidity, radon, carbon monoxide, or the moisture behind mold, so address the source first.
Still Have Questions About Your Home's Air Quality?
Testing your home's air is the first step toward breathing easier. Once you know what's in your air, you can choose the right solution with confidence. Browse all of our air quality testing products.
Not sure which test is right for your home? Our product experts are here to help. Call us toll-free at 1-800-934-9194 for a free consultation.