Dri-Eaz Rogue Air Mover - Blue is backordered and will ship as soon as it is back in stock.
Description
Description
Every trip between the van and a flooded room costs you time on a restoration job. The Dri-Eaz Rogue Air Mover rethinks airflow and stacking for that problem, so you carry more drying power on each trip and spend less time getting equipment in place.
Key Features and Benefits of the Dri-Eaz Rogue Air Mover
- 890 CFM Airflow: Rated at up to 1.65 inches of static pressure, so you keep strong airflow pushing across wet carpet and floors even against resistance.
- Slotted Base Outlets: Slotted outlets under the 8.9-inch-tall housing push air below and in front of the air mover, so you dry the floor and baseboard zone better.
- Stacks 6 High: The modular stacking design lets you stack up to six Rogues, which saves shelf space in your van and floor space in storage.
- Daisy-Chain Power: A 12-amp convenience outlet and a 1.9-amp draw let you daisy-chain up to six Rogues from a single machine, so you run fewer cords back to the wall.
- Hidden Tracker Compartment: A hidden compartment holds the tracker you choose, from an AirTag to a GPS device, so you can find equipment left behind on job sites.
- ETL Listed: Carries an ETL listing to UL and CSA standards, giving you a named safety certification for every drying job.
- Xactimate Code WTRDRY: Bills under Xactimate code WTRDRY, so you can document air mover use on insurance estimates without searching for the right line item.
- Rugged Construction: An injection-molded housing and powder-coated steel wire grilles stand up to the knocks of loading and transport every day.
- Simple Controls: One on/off switch on 115-volt, 60 Hz power means setup is just plugging it in and flipping it on.
- Long Power Cord: The power cord is 20 feet long, so you can reach a wall outlet from the middle of a room without an extension.
- Color Options: Choose Blue, Red, or Black to color-code your fleet or match your company branding.
Planning Floor Placement and Daisy Chains with the Rogue
The Rogue measures 16.7 x 20 x 8.9 inches (L x W x H), so plan on a footprint just under 2 feet in each direction for every machine you set on a wet floor. When you build a daisy chain, the numbers work for you. At 1.9 amps each, a full chain of six Rogues draws 11.4 amps, just under the 12-amp rating of the convenience outlet. That leaves only a small margin, so keep the chain to Rogues alone and don't add other equipment to the same outlet.
Sylvane's Expert Take
If you run a water damage restoration crew out of a shelved van, the Rogue fits the way you work. It does its best work on carpet and floor-level drying, where the base outlets put air right at the wet edge. Control is limited to one on/off switch, so you manage drying by where you place each machine.
Fleet owners will care most about the 1.9-amp draw and the tracker compartment. All three colors have identical specs, so pick the one that keeps your fleet organized and start stacking.
Specifications
Specifications
-
TypeLow Profile/Thrust Air Mover
-
CertificationsETL
-
ColorBlueRedBlack
-
ControlsManual
-
Drying ApplicationCarpet, Floor/Baseboard, Ceiling
-
Maximum Cubic Feet per Minute (CFM) (CFM)890.0
-
XACTIMATE CodeWTRDRY
-
Maximum Amperage (Amps)1.9
-
Power Cord Length (ft.)20
-
Voltage (V)110-120
-
Depth (in.)16.7
-
Height (in.)8.9
-
Weight (lbs.)17.9
-
Width (in.)20.0
-
Additional FeaturesStackable, Daisy-Chainable, On-Board GFCI Safety Outlet(s)
-
Manufacturer's WarrantyLimited Lifetime Housing Warranty














