Open-Box: Used Quest Hi-E Dry 195 Dehumidifier

The new Quest Hi-E Dry 195 is a high-capacity dehumidifier designed for commercial areas with heavy moisture loads like warehouses, spa and indoor pool houses, locker rooms, and stores. Set the onboard humidistat from 20% to 80% and remove up to 192 pints of moisture at AHAM (80 F, 60% RH). 

An update to the popular Hi-E Dry 195, you can use it as a standalone or ducted solution in areas as low as 33 degrees F.  

Note: This heavy-duty dehumidifier requires a NEMA 5-20 P plug and dedicated 20-amp circuit. 

Reliable for Years of Use

American-made quality means its durable to be used in the toughest environments. This updated Hi-E Dry 195 is backed with a 5-year warranty on its sealed system. Large wheels allow you to take it anywhere, and it's effective in temperatures between 33 and 110 degrees F. 

Optional Ducting

You can duct this model to other rooms using the 12-inch duct inlet or duct it to let outdoor air inside (which is then run through the unit). If you don't need to duct it, just use it as a standalone model in commercial spaces. Simply add this ducting kit. 

Internal Condensate Pump

Removing large amounts of moisture doesn't have to be difficult. An internal condensate pump automatically pushes moisture to another location. A 20-foot hose is included with the Quest Hi-E Dry 195 Dehumidifier, and the condensate pump moves water up to 17 feet vertically or horizontally.  

Updated Dehumidifier Features

The Quest 195 is an update to the Hi-E Dry model. What can you expect?

• Smaller Design: Smaller and more compact design than the previous model.
• More Efficient: Not only does it remove more moisture in lower temperatures, it also removes more moisture per kilowatt hour. The updated model pulls 5.9 pints/kwh. It requires a dedicated 20-amp circuit and 110/120-volt outlet. 
• Better Filtration: The updated 195 comes with a MERV 11 filter instead of the MERV 8.
• More Powerful Airflow: At its highest fan and power speeds, it moves air through your dehumidifier at 610 CFM, instead of of 540 CFM from the original 195-pint model.

Additional Features

• Large Operating Temperature: The Hi-E Dry 195 operates in temperatures between 33 and 110 degrees F. In fact, it removes even more moisture than the previous Hi-E Dry 195 in low temperatures down to 33 degrees F.   
• Updated Compact Design: Large wheels and compact design (42 inches H x 20 inches W x 19 inches L) allow for more flexibility with placement.
• MERV 11 Filter: Filter out dangerous allergens and microscopic particles from air as you remove moisture.
• Long Power Cord: A 10-foot power cord is included with purchase.
• Eco-Friendly Refrigerant: Uses R-410A refrigerant, an environmentally friendly refrigerant that will not deplete ozone.
• Portability: Four caster wheels allow for quick and easy portability of the unit.
• American-Made: Proudly made in America, the Quest Hi-E Dry 195 is manufactured in Madison, WI.

Easy to-Use Digital Display

The digital control panel shows the current room's relative humidity as well as your set humidity level. You can also adjust your set humidity level between 20% and 80% or turn the unit on or off.

Summary

The improved Hi-E Dry 195 keeps tough commercial environments like gyms, warehouses and storage units at a healthy and safe humidity level all year.

What Customers Love

• Updated Design: Our customers have always trusted the 195 to remove excess moisture, but the new model is smaller, more efficient and easier to use.
• Internal Pump: Draining collected moisture can be tough in commercial spaces, but the internal pump and included drain hose take the thought out of removing it. 

Things to Consider

• Replace Your Filter: Keep your dehumidifier running at full force by replacing your MERV 11 filter as needed.
• Worried About Sizing?: Maintaining healthy humidity in commercial spaces varies greatly based on insulation, ceiling height and other factors. For a personal consultation from one of our experts, call us at 1-800-934-9194.  
• Voltage: Note: This heavy-duty dehumidifier requires a NEMA 5-20 P plug and dedicated 20-amp circuit. .