Tornado Windshear Downdraft Axial Air Mover is backordered and will ship as soon as it is back in stock.
Drying a water damage zone by zone typically means dragging equipment around all afternoon. The Tornado Windshear Downdraft Axial Air Mover takes a different approach, pulling warm, dry air that collects near the ceiling and pushing it out at floor level, 360 degrees, where moisture remains.
Because the airflow spreads outward instead of in one narrow stream, you can place this downdraft air mover in an open room and keep walkways clear.
Key Features and Benefits of the Tornado Windshear Downdraft Axial Air Mover
- Powerful Airflow: A six-blade precision-pitched fan moves up to 3,500 CFM, directing air across floors for faster drying.
- Manual Speed Control: A manual switch provides two fan speeds on a continuous-duty motor, so you can adjust airflow for the space.
- Low Power Draw: The 0.25 horsepower motor uses 253 watts and 2.2 amps on 110 to 120 volt power, helping you plan circuit use.
- Daisy Chain Cord: A 20-foot-long cord with daisy-chain capability links machines together, reducing cords across your work area.
- Resettable Breaker: A 5-amp resettable circuit breaker helps you restore operation after an electrical interruption.
- Stacking Design: Stack up to four air movers for transport, helping you save storage space between jobs.
- Rolling Transport: The 52-pound air mover rolls on four caster wheels, while curved molded legs and a telescoping handle support movement.
- Compact Footprint: The device's dimensions are 22 x 18 x 23 inches, giving you plenty of room for maneuvering during busy jobs.
Which Drying Angle Should You Use?
The housing locks at four positions, so you can select the airflow direction for the job. Face down on its caster wheels, it pushes air into the floor and outward. Tilt it back to 15 degrees or 30 degrees for elevated drying. Stand it upright at 90 degrees to direct air across a room, or tilt it forward for directional airflow.
Sylvane's Expert Take
The Tornado Windshear Downdraft Axial Air Mover thrives in open rooms and wide work areas where whole-room airflow is needed. The four-position housing and 3,500 CFM output matter most when you need to direct air across a floor quickly. Use it when your drying plan calls for broad coverage from a stackable machine.
-
Number of Speeds2
-
TypeAxial Air Mover
-
ColorYellow
-
ControlsManual
-
Drying ApplicationFloor/Baseboard, Wall
-
Maximum Cubic Feet per Minute (CFM) (CFM)3500.0
-
California Residents⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
-
Maximum Amperage (Amps)2.2
-
Maximum Wattage (W)253.0
-
Power Cord Length (ft.)20
-
Voltage (V)110-120
-
Depth (in.)22.0
-
Height (in.)23.0
-
Weight (lbs.)52
-
Width (in.)18.0
-
Additional FeaturesStackable
-
Manufacturer's Warranty10-Year Rotationally-Molded Bodies Limited Warranty; 2-Year Parts Limited Warranty; 1-Year Labor Limited Warranty
