Tornado Windshear Sidedraft Axial Air Mover
Tornado Windshear Sidedraft Axial Air Mover is backordered and will ship as soon as it is back in stock.
Description
Description
Water damage jobs live or die on airflow. The Tornado Windshear Sidedraft Axial Air Mover puts airflow up to 3,000 CFM against wet carpet and saturated drywall, and its four-position housing lets you aim that air where the moisture actually sits rather than wherever the machine happens to face.
With a 2.2-amp draw and a built-in GFCI outlet, this air mover chains to the next one from its own body, so a single wall outlet can feed a whole hallway of drying machines.
Key Features and Benefits of the Tornado Windshear Sidedraft Axial Air Mover
- Airflow Capacity: A 0.25-horsepower, 253-watt motor moves air at up to 3,000 CFM for fast drying across carpet and wall surfaces.
- Directional Airflow: The housing offers four airflow positions, up to a 90-degree tilt, so you can aim air at floors, baseboards, or elevated surfaces.
- Built-In GFCI: An onboard GFCI outlet lets you daisy-chain up to six machines from one wall outlet and adds shock protection on damp floors.
- Low Draw: Drawing 2.2 amps, you can run several machines at once without tripping the breaker on a shared circuit.
- Manual Controls: Manual controls give you two speeds, so you can throttle airflow back in occupied rooms or open it up overnight.
- Roto-Molded Housing: The rotationally molded polyethylene shell with a molded-in handle takes jobsite knocks, and the whole air mover weighs 37 pounds.
- Stackable Housing: Stack up to five devices high for storage and transport, so a full drying setup fits in one van load.
- Compact Footprint: Measuring 24 x 24 x 21 inches, it sits along hallways without blocking foot traffic.
- Long Power Cord: The 20-foot-long power cord reaches distant outlets and keeps your placement flexible across a large room.
- Circuit Protection: A resettable 12-amp breaker guards the motor, so an overload means a quick reset instead of a service call.
How Many Sidedraft Air Movers Fit on One Circuit?
Because each machine pulls just 2.2 amps at 120 volt power, you can plug up to six air movers into a single 15-amp circuit, or 9 onto a 20-amp circuit, before you need another source of power. Daisy-chaining itself is capped at six machines from any one GFCI outlet, so on larger water restoration projects, split the run.
Sylvane's Expert Take
Restoration contractors and facility crews drying carpet and wall cavities in multi-room projects where outlets are scarce will get the most from the Tornado Windshear Sidedraft Axial Air Mover. The standout spec is the 2.2-amp draw paired with the onboard GFCI outlet, which turns one circuit into a six-machine drying line. Weigh the four-position housing heavily if your work mixes flooring and elevated drywall, then let the 10-year housing coverage settle it.
Specifications
Specifications
-
Number of Speeds2
-
TypeAxial Air Mover
-
ColorBlack
-
ControlsManual
-
Drying ApplicationCarpet, Wall
-
Maximum Cubic Feet per Minute (CFM) (CFM)3000.0
-
California Residents⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
-
Maximum Amperage (Amps)2.2
-
Maximum Wattage (W)253.0
-
Power Cord Length (ft.)20
-
Voltage (V)110-120
-
Depth (in.)24.0
-
Height (in.)21.0
-
Weight (lbs.)37
-
Width (in.)24.0
-
Additional FeaturesStackable, Daisy-Chainable, On-Board GFCI Safety Outlet(s)
-
Manufacturer's Warranty10-Year Rotationally-Molded Bodies Limited Warranty; 2-Year Parts Limited Warranty; 1-Year Labor Limited Warranty
